Category: L9000 Series

(Results from 21 to 30)
What changed between the L9080 and L9090 electrified locks?
 ...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage
What wire gauge is required for the L9090EL/EU, L9091EL/EU, L9092EL/EU, L9093EL/EU, L9094EL/EU, L9095EL/EU Schlage electrified locks?
Please see here for the wire run and wire gauge requirements for the L9090EL/EU, L9091EL/EU, L9092EL/EU, L9093EL/EU, L9094EL/EU, L9095EL/EU Schlage Mortise locks. ...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Schlage
Can AC or rectified AC voltage be used to operate the L9090, L9091, L9092, L9093, L9094 or L9095 EL/EU mortise lock?
AC voltage should never be used even when using a rectifier. ...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage » Schlage | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage
The Schlage electrified mortise lock motor makes noise when powered but will not lock or unlock after changing the lock handing.
When the RX switch on a L9090, L9091, L9092, L9093, L9094, L9095 is handed incorrectly it can cause the outside lever to rotate in the upward motion, but stayed in the locked position when trying to r...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
Why are the mounting posts on the SL1 too short?
The SL1 trim uses longer mounting posts than a standard trim.For SL1 trim on a 1-3/4” door, the mounting post are L583-214.For SK1 trim on a 1-3/4” door, the mounting post are L583-212.  No C...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage » Schlage | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage
Is the 09-611 indicator still available?
The 09-611 indicator will remain available as a stand-alone part for sectional trim.  Pricing and ordering information is listed in the current pricebook. ...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage » Schlage | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L400 Series | Schlage Commercial » Mechanical Locks » Mortised » L400 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage
Are indicator kits available to add to an L9000 mortise lock?
Retrofit Indicator kits are available to add Indicator Trim to 36 compatible L9000 Series functions.A complete list of functions available with Indicator Kits, part numbers and pricing can be found he...
Schlage Commercial » Mechanical Locks » Mortised » L400 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage
Can the driver be replaced on the Gen1 indicator for the Schlage L9000 locks?
 L583-709  Message sign, LOCKED/UNLOCKED, for 180 degree indicator - NO LONGER AVAILABLEL583-710  Message sign, OCCUPIED/VACANT, for 180 degree indicator - NO LONGER AVAILABLEL583-711 &...
Schlage Commercial » Mechanical Locks » Mortised » L400 Series | Schlage Commercial » Mechanical Locks » Mortised » L400 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage
What are the cylinder length requirements for the L-series Gen1 high visibility indicators?
For the Gen1 indicators, the cylinder length required (for standard 1-3/4” door) is 1-1/4” regardless whether the trim is sectional or escutcheon.For the older 09-611 (Chevron) sectional (rose) in...
Schlage Commercial » Mechanical Locks » Mortised » L400 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
Why is the mortise Gen1 indicator showing locked when the door is unlocked?
                 ...
Schlage Commercial » Mechanical Locks » Mortised » L400 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series

Support by product