Category: Mortised

(Results from 81 to 90)
Description of the 09-633 inside escutcheon with Thumb Turn and lever or knob.
The 09-642 was an Inside Escutcheon w/ ADA Thumb Turn 09-544 for N escutcheon, no lever/knob included. This was listed for a short period of time in the Pricebook and Service Manual. The 09-548 ...
Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
How many degrees of lever rotation for latch retraction on a Schlage L9000 Mortise Lock?
The amount of lever rotation needed is approximately 45 Degrees....
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage » Schlage | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
Can the L9081 be ordered with RX, LX, and DPS options?
The L9081 is not available with RX, LX or DPS options. ...
Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial
What is included when ordering Locks Less Lock Case (Trim Kits) for the L9000 series locks?
Included in the trim kits are complete sets of outside and inside trim with spring cages, spindles, mounting screws and thru-bolts as required for the function specified.  Specify Func...
Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial
Do Schlage and Falcon locks meet the California code requirement 11B-309.4 for 5lb force to unlatch the door?
California code requirement 11B-309.4 Operable parts shall be operable with one hand and shall not require tight grasping, pinching, or twisting of the wrist. The force required to activat...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial » Mechanical Locks » Mortised
What is the offset for the Von Duprin 6210 Electric Strike with the Schlage L9000 Mortise lock?
The Von Duprin 6210 x L9000 uses the same 3/8" Center line offset as the L9000 x Mechanical Strike.Click here for the L9000 Template showing the 3/8" offset.Click here for the Von Duprin Frame Templat...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage » Schlage | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Von Duprin
How to convert the L9462 to L9463?
To convert from L9462 to L9463, replace the inside keyed mortise cylinder on the L9462 with the 09-904 mortise thumbturn housing, specify finish, length, and handing. ...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
Can Schlage or Falcon cylindrical locks be used on a MRI room application?
Neither Schlage or Falcon make a product specifically designed for use in a MRI room application. MRI rooms may be modular, and hardware may be supplied by the manufacturer. In instances where hardw...
Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial » Mechanical Locks » Deadbolts | Schlage Commercial » Mechanical Locks » Mortised
What are the dimensions for the Deadbolt and Latch Cutouts in the L/LV9000 Armor Front?
Please see drawing below for dimensions of the cutouts for Deadbolt, Auxiliary Latch and Latchbolt used on the L/LV9000 Armor Front. The material thickness is .039".  Note: Not all Arm...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage » Schlage | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage
Will the Schlage L9000 Mechanical Locks ordered with RX, LX , DPS or DM Options include the Molex Connector?
The  L9000 Mechanical Locks will include the Molex Connector when ordered with RX, LX, DPS or DM Options.      ...
Schlage Commercial » Mechanical Locks » Deadbolts » D Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage » Schlage | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series

Support by product