Category: Mortised

(Results from 71 to 80)
Should I use Dummy trim on an Inactive door using Automatic Flush Bolts?
On a door with automatic flush bolts, the inactive leaf can’t have a dummy lever, push bar, or other hardware that would make it appear that the Inactive leaf could be operated for egress.  N...
Schlage Commercial » Exit Devices | Schlage Commercial » Mechanical Accessories » Flush Bolts and Coordinators | Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial » Mechanical Locks » Mortised
Can the paddles on the HL6-9000 be mounted vertically on thumbturn functions?
When the cylinder application is used, the paddle on the key side may be mounted in the down or horizontal position, or when the thumbturn application is used, paddles must be mounted in the horizon...
Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial
Is there an offset between the Center Line of the Strike and the Lock on an HL6-9000?
The Strike Center Line is located 3/8" or 10 mm above the Lock Center Line.  Please click here for a link to the Installation Instructions; reference step 2a.   ...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage » Schlage | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series
What are the dimensions for the 09-509 L583-363 Large ADA Thumbturn?
Below is the 09-509 Rose with dimensions in inches: Below is the L583-363 Large ADA Thumbturn with basic dimensions in inches:          ...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series » Falcon | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage » Schlage | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L400 Series | Schlage Commercial » Mechanical Locks » Mortised » L400 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LM9200
How can the L9000 Key Override Feature lock case be identified?
The difference in the lock case is where the hub drive is located for the thumbturn, the new Key Overrided functions will also have a black case for easier identification.  Please click here for ...
Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series | Schlage Commercial
Can handing be changed in the field on the L9000 Key Override Feature?
Handing can be changed in the field with the standard method of moving the handing screw on the lockcase.Click here for installation instructions...
Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series | Schlage Commercial
What door thicknesses are available when using the L9000 Key Override Feature?
The use of the L9000 with the Key Override Feature does not impact what door thicknesses are available....
Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series | Schlage Commercial
What lock functions are available with the L9000 Key Override Feature?
The following functions are available with the L9000 Key Override Feature:L/LV9056, L/LV9456, L/LV9480, L/LV9485, L/LV9486, L/LV9496, L/LV9492EL/EU, L/LV9493EL/EUHL6 Hospital latch trim – L9456/85/9...
Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series | Schlage Commercial
Is additional door prep needed for the L9000 Key Override Feature?
No additional door prep is required to install, use standard door prep template for the appropriate lock function and trim.Please click here for the L9000 series template directory....
Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series | Schlage Commercial
What are the dimensions of the L9000 Key Override Feature?
The Key Override Feature is built into the lock case, no dimensions are available....
Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series | Schlage Commercial