Category: Mortised

(Results from 31 to 40)
What is the part number for the set screw for the SL1/SK1 inside ligature trim?
The set screw part number for the inside SL1/SK1 ligature trim is L583-585....
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Schlage | Schlage Commercial
Can the LM9200 be installed into an aluminum door?
Not a recommended application due to the amount of material removed from the door as well as the special support brackets needed for the top and bottom latches....
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial
How is the RX switch handed on the L9010?
The RX switch doesn't require handing as there is not a handing screw on the L9010 lock body. The RX switch will trigger both the outside lever and the inside lever. ...
Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage
How to determine the handing of the L9000 one-hole strikes for latching functions?
The XL11-820 & 10-145 is a one hole strike for latching functions, RH and LHR doors. The XL11-821 & 10-144 is a one hole strike for latching functions, LH and RHR.     ...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial
Can the DPS switch for the L lock be added in the field?
The DPS switch for the L lock is not available as a separate component and must be order with the lock case....
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage » Schlage | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage
Can you use ligature resistant trim on LM9200 series?
The LM9200 has not been tested with any ligature resistant trim The LM9200 cannot be order or used with SL1 or SK1 trim. This is due to the fact the latches can create ligature points....
Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » LM9200
Is the SL1 and SK1 trim handed?
The SL1 and SK1 trim is not handed....
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial
What is the projection off the door for the L series roses?
The L series roses all have a .414" projection from the face of the door....
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage » Schlage | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial
What finish do the MA screw packs come in when the lock is ordered in 643e finish?
The screw packs will be provided in a 613 finish. ...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Mortised » MA-Series | Schlage Commercial » Mechanical Locks » Mortised » MA-Series » Falcon | Schlage Commercial » Mechanical Locks » Mortised
What is Rescue Hardware used for?
Rescue hardware is used on in swinging bathroom doors in facilities where there is a higher likelihood that someone might fall against the door inside the bathroom, preventing the door from being open...
Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial » Mechanical Locks » Mortised