Category: Cylindrical

(Results from 21 to 30)
Is the ND lock available to accept Sargent, Corbin Russwin, Yale or Medeco cores or cylinders?
Only the Schlage ND-Series can be prepped to accept non-Schlage cores. All designs are supplied with the appropriate tailpiece Non-Schlage cores are NOT included Lever designs available vary depe...
Key Systems » Cylinder Mechanism » Schlage | Mechanical Locks » Cylindrical » A Series » Schlage | Mechanical Locks » Cylindrical » AL Series » Schlage | Mechanical Locks » Cylindrical » ND Series » Schlage
Can the A-series knob be used on a D-series lock?
The knobs on these products are not interchangeable with each other....
Mechanical Locks » Cylindrical » A Series » Schlage | Mechanical Locks » Cylindrical » D Series » Schlage
Why isn't the LEV available with a cylinder option?
The Levon lever was created to initially satisfy the ADA requirements for locks, but it is too small to fit a cylinder.  The equivalent to the Levon lever on our other products is the Rhodes and S...
Mechanical Locks » Cylindrical » A Series » Schlage | Mechanical Locks » Tubular / Interconnected » H Series » Schlage
What is the size of the Levon lever in the A series?
See the Levon lever below, Figure 1. Figure 1: Levon dimensions  The door face to lever tip distance is 1 3/8"...
Mechanical Locks » Cylindrical » A Series » Schlage | Mechanical Locks » Tubular / Interconnected » H Series » Schlage
Can the wafer cylinder in an A lock be replaced with a standard cylinder?
The chassis needs to be replaced....
Mechanical Locks » Cylindrical » A Series » Schlage
What is a Grade 2 Lock?
Grade 2 locks are tested and certified to be in compliance with the following ANSI/BHMA Standards: Cylindrical, Bored and Preassembled Locks & Latches 400,000 Certified Cycles ANSI/BH...
Mechanical Locks » Cylindrical » B Series » Falcon | Mechanical Locks » Cylindrical » W Series » Falcon | Mechanical Locks » Cylindrical » A Series » Schlage | Mechanical Locks » Cylindrical » AL Series » Schlage | Mechanical Locks » Deadbolts » D Series » Falcon | Mechanical Locks » Deadbolts » B Series » Schlage | Mechanical Locks » Tubular / Interconnected » CS200 Series » Schlage | Mechanical Locks » Tubular / Interconnected » H Series » Falcon | Mechanical Locks » Tubular / Interconnected » Y Series » Falcon | Mechanical Locks » Tubular / Interconnected » H Series » Schlage | Mechanical Locks » Tubular / Interconnected » S200 Series » Schlage | Mechanical Locks » Tubular / Interconnected » S-Series » Schlage | Schlage
Will the AL lock fit a 2" thick door standard?
The AL series lock fits up to 1 7/8” door thickness out of box....
Mechanical Locks » Cylindrical » AL Series | Mechanical Locks » Cylindrical » AL Series » Schlage
Can you install a Schlage S lever on an AL lock?
You can not install the S lever onto an AL lock.  The AL and S lever trim is not compatible with each other....
Mechanical Locks » Cylindrical » AL Series | Mechanical Locks » Cylindrical » AL Series » Schlage | Mechanical Locks » Tubular / Interconnected » S-Series | Mechanical Locks » Tubular / Interconnected » S-Series » Schlage
What is the part number of the new plastic castlenut wrench?
The castlenut wrench material was changed from steel to a very strong polymer.  The new part number is 40-017....
Mechanical Locks » Cylindrical » AL Series » Schlage | Mechanical Locks » Cylindrical » D Series » Schlage
Why can't a new spring cage or driver be installed on an older AL lock?
In 2002 the Schlage AL-Series underwent a design change that affected the spring cage, driver, and plastic insert.  Spring cage and driver replacements for AL locks manufactured before this design ch...
Mechanical Locks » Cylindrical » AL Series » Schlage