What are the different cylinder types available?
Conventional Cylinders - A conventional cylinder is one that requires some breakdown of the lock in order to be removed.
These are the most commonly used cylinders sometimes called key-in-lever or...
Key Systems » Cylinder Category » Falcon | Key Systems » Cylinder Mechanism » Schlage | Key Systems » Cylinders » Cylinder » Falcon | Schlage
What cylinder do I use with Monarch key in lever trim?
The Monarch KIL trim uses the following cylinders: Schlage Cylinders 23-013 Conventional 20-750 Primus 20-750-XP Primus XP 20-550 Primus UL437 20-550-XP Primus UL437 XP Falcon Cylinder A23165-02 (...
Exit Devices » Touch Bar » 19 Series » Falcon | Key Systems » Cylinder Category » Falcon | Key Systems » Cylinder Mechanism » Schlage | Key Systems » Cylinders » Cylinder » Falcon
What cylinder is used for the Falcon 510L and 510L-NL trim?
The Falcon Monarch 510L and 510L-NL trim will accept either a 1 1/4" Mortise cylinder with a straight cam or a 1 3/8" Mortise cylinder with a straight cam using the blocking ring provided with the tri...
Exit Devices » Touch Bar » 25 Series » Falcon | Key Systems » Cylinder Category » Falcon
What keyway or section is shipped with the 914 KIL-IC?
The 914KIL-IC trim is shipped with a Small format interchangeable core (SFIC) in a 6 pin "A" section/keyway. A comparable core from Falcon would be the C646 (uncombinated - no pins) or C606...
Exit Devices » Touch Bar » 19 Series » Falcon | Key Systems » Cylinder Category » Falcon
What is the correct cylinder cam # for 718C for a concealed vertical rod device?
Devices built After 2/28/2011: Use a 1 1/8" - 1 1/4" mortise cylinder with straight narrow cam. (Cam profile same as the Schlage B520-731, see table below for part numbers)
Devices built Be...
Exit Devices » Cross Bar » XX Series » Falcon | Exit Devices » Touch Bar » 17 Series » Falcon | Exit Devices » Touch Bar » 18 Series » Falcon | Exit Devices » Touch Bar » 24 Series » Falcon | Exit Devices » Touch Bar » 25 Series » Falcon | Key Systems » Cylinder Category » Falcon
What mortise cylinder cam is needed for KR4023?
The KR4023 mullion requires a 1-1/4" mortise cylinder with straight cam. This is stated in box 7 on the first page of the KR4023 mullion instructions....
Exit Devices » Mechanical Accessories » Mullion » Falcon | Key Systems » Cylinder Category » Falcon
What keyway comes with the Falcon 19-KIL?
The standard cylinder keyway that comes with the 914KIL trim is a Schlage 6 pin "C" section....
Exit Devices » Touch Bar » 19 Series » Falcon | Key Systems » Cylinder Category » Falcon