What cylinder do I use with Monarch key in lever trim?
The Monarch KIL trim uses the following cylinders:
Schlage Cylinders
23-013 Conventional
20-750 Primus
20-750-XP Primus XP
20-550 Primus UL437
20-550-XP Primus UL4...
Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon | Schlage Commercial » Key Systems » Cylinder Category » Falcon | Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Key Systems » Cylinders » Cylinder » Falcon
What cylinder is used for the Falcon 510L and 510L-NL trim?
The Falcon Monarch 510L and 510L-NL trim will accept either a 1 1/4" Mortise cylinder with a straight cam or a 1 3/8" Mortise cylinder with a straight cam using the blocking ring provided with the tri...
Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon | Schlage Commercial » Key Systems » Cylinder Category » Falcon
What keyway or section is shipped with the 914 KIL-IC?
The 914KIL-IC trim is shipped with a Small format interchangeable core (SFIC) in a 6 pin "A" section/keyway. A comparable core from Falcon would be the C646 (uncombinated - no pins) or C606...
Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon | Schlage Commercial » Key Systems » Cylinder Category » Falcon
Will the SFIC mortise housing accept both six and seven pin cores?
Yes. Both Schlage and Falcon SFIC mortise housings will accept 6 and 7 pin cores with no additional parts....
Schlage Commercial » Key Systems » Cylinder Category » Falcon | Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Key Systems » Cylinders » Cylinder » Falcon | Schlage Commercial » Schlage
Will a Primus cylinder work for the Falcon 510L trim?
Conventional Mortise cylinder20-700 118FSIC Mortise cylinder 20-763 (A 36-082 037 blocking ring required)20-771 (includes a 36-082 3/8" blocking ring)SFIC Mortise cylinderNot offered in SFIC core...
Schlage Commercial » Key Systems » Cylinder Category » Falcon
What mortise cylinder cam is needed for KR4023?
The KR4023 mullion requires a 1-1/4" mortise cylinder with straight cam. This is stated in box 7 on the first page of the KR4023 mullion instructions....
Schlage Commercial » Exit Devices » Mechanical Accessories » Mullion » Falcon | Schlage Commercial » Key Systems » Cylinder Category » Falcon
What keyway comes with the Falcon 19-KIL?
The standard cylinder keyway that comes with the 914KIL trim is a Schlage 6 pin "C" section....
Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon | Schlage Commercial » Key Systems » Cylinder Category » Falcon
What is the control key bitting for 0 bitted small format interchangeable cores?
For all Schlage and Falcon small format interchangeable cores shipped from the factory 0-bitted, the control key will be cut to all 4's (as of June 25th, 2022 Falcon has discontinued the 0-bit op...
Schlage Commercial » Key Systems » Cylinder Category » Falcon | Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Key Systems » Cylinders » Cylinder » Falcon | Schlage Commercial » Schlage