Category: Touch Bar

(Results from 41 to 50)
If the Von Duprin M996L Trim is too quiet, can I make it louder?
The motorized M996L trim does operate slightly quieter than its solenoid-based E996L predecessor. You will no longer hear the "click" of the solenoid, as the motor has smooth start and stop oper...
Schlage Commercial » Exit Devices » Touch Bar
Can the 260U-F be used with 98/9927-F and 98/9927-F-LBR Devices?
Yes. The 260U-F  strike is listed  for use with 98/9927-F and 98/9927-F-LBR devices.  All LBR devices require the use of an auxiliary fire latch. This is not a common applicat...
Schlage Commercial » Exit Devices » Touch Bar
Is the "24-C Aluminum Mounting Bracket" still available?
The "24-C Aluminum Mounting Bracket" was discontinued in 2019 and is no longer available....
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Touch Bar | Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon
Can the 718C be used with 25 Series devices?
The 718C is compatible only with the 24C or the 25C device.  It cannot be used with any other device from the 24/25 Series. See here for installation instructions. Requi...
Schlage Commercial » Exit Devices » Touch Bar | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon | Schlage Commercial » Key Systems » Cylinders | Schlage Commercial » Glossary » Exits
Can the 283 strike be used with a metal frame with concealed vertical rod devices?
No, per the UL Compliance group, the concealed rod devices are only tested with the 338 strike with metal frames. This applies to panic and fire applications.  The 283 strike may only be used wit...
Schlage Commercial » Exit Devices » Recessed » 94/95 Series INPACT | Schlage Commercial » Exit Devices » Touch Bar | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series
How many M996L/L-BE Trims can be connected to a PS902, PS904, PS906, PS914 power supply?
M996L/L-BE Summary:The Von Duprin M996L/L-BE trim is a motorized, electrified trim which can be locked or unlocked remotely.The trim can be field configured as Fail Safe or Fail Secure, and automatica...
Schlage Commercial » Exit Devices » Touch Bar | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series
Is there a video for how a Chexit works?
Click here to watch a brief overview video of Chexit on the Allegion product support YouTube channel....
Schlage Commercial » Exit Devices » Touch Bar
Video : How To Change Handing For Von Duprin 996L Trim
Click here to watch a video for re-handing the Von Duprin 996L Trim....
Schlage Commercial » Exit Devices » Touch Bar
What are the details about CE marking requirements on products marketed in the European Union?
Many products require CE marking before they can be sold in the EU. CE marking indicates that a product has been assessed by the manufacturer and deemed to meet EU safety, health and environmen...
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Touch Bar | Schlage Commercial
Can RX996 be used to inhibit Chexit
For Rim / Vertical Devices: No,  RX 996 trim can not be used to inhibit Chexit.  The trim lever can not be rotated while the Chexit is armed, and therefore the RX996 switch will not op...
Schlage Commercial » Exit Devices » Touch Bar

Support by product