Category: Touch Bar

(Results from 31 to 40)
Can I add hex dogging to a QEL device?
To add hex dogging to a QEL device, the complete motor assembly must be replaced.  If you have a current motor design, replace it with a HD-QEL motor kit (#958002).  If you have an older mot...
Schlage Commercial » Exit Devices » Touch Bar | Schlage Commercial » Exit Devices » Touch Bar » 24 Series | Schlage Commercial » Exit Devices » Touch Bar » 25 Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series
How long is the push bar on Von Duprin 33/35/98/99 2-foot exit devices?
For 2-foot exit devices, the push bar is 18 inches long....
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Touch Bar | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin
Does Falcon supply an MEL conversion kit for the model 24/25 devices?
Does Falcon supply an MEL conversion kit for the model 24/25 devices?Yes, the MEL conversion kit is available for the Falcon 24/25 exit device.  The conversion kit CANNOT be used if the device is...
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Touch Bar
Are there two sizes for the Von Duprin 94/9547 device?
Are there two sizes for the Von Duprin 94/9547 device?Yes, the standard size is intended for door sizes from 2' 10" to 4'.  The "smaller" size is intended for door sizes from 2' 6" to 2' 9 7/8".&...
Schlage Commercial » Exit Devices » Touch Bar
What strike is required for the Von Duprin 98/9927F LBR device?
What strike is required for the Von Duprin 98/9927F LBR device?The 499F strike is required when using the Von Duprin 98/9927F LBR device.  ...
Schlage Commercial » Exit Devices » Touch Bar | Schlage Commercial » Von Duprin
Have Falcon 20 Exit devices been tested wtih electric strikes?
No, Falcon 20 devices have not been specifically tested with electric strikes....
Schlage Commercial » Exit Devices » Touch Bar
What is the part number for the "700/900 Lock Spring"?
The "700/900 Locking Spring" is part number 661567....
Schlage Commercial » Exit Devices » Touch Bar | Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon
What templates to I use for Von Duprin M996L trim?
Use the same templates as specified for E996L trim.  Click Here For Wood Door Templates Click Here For Metal Door Templates On the template page, you can use the same templates as s...
Schlage Commercial » Exit Devices » Touch Bar
Can the Von Duprin M996L lever be used on outdoor applications?
As of 2020,  the Von Duprin M996L lever trim has not been tested for full outdoor usage. This trim can be used on exterior doors of a building. For additional questions, please contact ...
Schlage Commercial » Exit Devices » Touch Bar
Why is my Von Duprin M996L lever trim not operating in its configured Fail Safe or Fail Secure mode?
Please reference your M996 instructions along with this article.   Instructions can be searched by clicking HERE.    Locate the  small DIP switch near the motor asse...
Schlage Commercial » Exit Devices » Touch Bar