Category: Multi-Family

(Results from 11 to 20)
Engage Locks - Firmware Version Not Showing Updated in Portal after Upgrade
 Sync the controller or lock via the mobile app to update the web portal with the new firmware version....
Schlage Commercial » Electronic Locks » NDE Series | Schlage Commercial » Multi-Family | Schlage Commercial » Electronic Locks » LE Series | Schlage Commercial » Electronic Locks » CTE
Are the control locks fire rated?
BE467F: ANSI/BHMA A156.36 Grade 2 FE410F: ANSI/BHMA A156.12 Grade 2 ANSI/BHMA A156.5, UL 90 minute door rated (Wood/Hallow Metal Door) Canada UL 20 minute wood door rated ...
Schlage Commercial » Electronic Locks » Offline » Multi-Family | Schlage Commercial » Electronic Locks » Offline » Multi-Family » Schlage Electronics | Schlage Commercial » Multi-Family
What is the warranty for the Control locks?
2 years from date of purchase and 1 year from date of install. ...
Schlage Commercial » Multi-Family
Schlage Control FE410 - Interior Lever Retracting Deadbolt, but not Deadlatch
Check the handing plate on the exterior is seated properly. Incorrect installation of the handing plate can cause the spindle to not engage with the interior hub....
Schlage Commercial » Multi-Family
Will the levers from CS210 lock work on the FE410?
On the FE410, they can use the levers from the CS210 locks. Part number: 06-242 specify design, specify finish.   Comes as a pair of levers (2) Use the same part number with the diff...
Schlage Commercial » Electronic Locks » Offline » Multi-Family | Schlage Commercial » Electronic Locks » Offline » Multi-Family » Schlage Electronics | Schlage Commercial » Multi-Family | Schlage Commercial » Multi-Family » FE410
Schlage BE467 - Battery Pack Replacement Part Number
The part numbers for the Control BE467 battery holder and cable is:47277177 -  The battery holder for 2.2/2.3 47266651 -  The cable only47416191 -  2.2 battery holder kit which inc...
Schlage Commercial » Multi-Family | Schlage Commercial » Multi-Family » BE467
Schlage FE410 - Passage or Deadlatch Issues in Retracting on Lever Press
Excessive wear on the latch caused by installation issues can create a condition where the lever will not be able to retract the deadlatch. If the door and frame are not aligned the deadlatch can...
Schlage Commercial » Multi-Family
Schlage Control FE410 - Lever Handing
The locks are handed from the factory, but they are field reversible.Details on re-handing are in the installation guide.  ...
Schlage Commercial » Multi-Family | Schlage Commercial » Multi-Family » FE410 | Schlage Commercial » Multi-Family » BE467
If an FE410 was ordered for 4" center, can lock be field updated to accept 5.5" center?
No, the FE410 is not field upgradable from 4" to 5.5" center.   You will  need to order a new lock. ...
Schlage Commercial » Multi-Family
Can the same MT20W be used across multiple Engage sites if on same Engage account?
No, you cannot. The MT20W can only be commissioned to one site at a time. If you want to use it at a different site, you will need to delete the MT20W from the site its attached to, FDR (Factory ...
Schlage Commercial » Readers » Enrollment | Schlage Commercial » Electronic Locks » ENGAGE Application | Schlage Commercial » Multi-Family | Schlage Commercial » Readers » Enrollment » MT20W

Support by product