Category: Push/Pull Latches

(Results from 21 to 30)
Is lead lining available for the HL6 latches?
Lead lining is if offered as a separate component (to be installed in the field).  The parts are offered for various backsets, see pricebook....
Schlage Commercial » Mechanical Locks » Push/Pull Latches | Schlage Commercial » Schlage | Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series
Are the HL6-9000 locks supplied with a cylinder?
Per notes in the PB, the cylinder must be ordered separately....
Schlage Commercial » Mechanical Locks » Push/Pull Latches | Schlage Commercial » Schlage | Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series
Is the HL6 9000 EO / EN option supplied with a blank plate?
The HL6 9000 EO/EN does not come with a blank plate for one side....
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Push/Pull Latches | Schlage Commercial | Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series
Are the HL6-9000 paddles ligature resistant compliant?
However, Schlage makes ligature resistant lever (SL1) and knob (SK1) kits that can be used in place of the HL6 push/pulls on the HL6-9000 mortise locks.When converting an HL6-9000 to have ligature tri...
Schlage Commercial » Mechanical Locks » Push/Pull Latches | Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series
Is the HL6 trim certified to UL305?
The HL-6 single point cylindrical or mortise locks are not tested to the UL305 (Panic Hardware). The panic standard doesn’t apply to these locks or trims....
Schlage Commercial » Mechanical Locks » Push/Pull Latches | Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series
What are the (4) # 10-32 x 3/8" TRPHMS screws used for that are shipped with HL6-L9000?
These screws can be used to fasten the top two screws of the paddle assembly directly to the door (metal door only).  It would be used in place of the stud assembly (part H- see here). ...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Push/Pull Latches | Schlage Commercial
What is positive latching?
A spring loaded throw on the edge of the door that engages into a strike plate on the door frame.Schlage and Falcon locks with a latch meet this requirement. ...
Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Push/Pull Latches | Schlage Commercial » Mechanical Locks » Tubular / Interconnected
Is the HL6 or HL6-9000 available for non-standard door thicknesses?
The HL6 and HL6-9000 are available for 1 3/4" door thickness only....
Schlage Commercial » Mechanical Locks » Push/Pull Latches | Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series
Are the PL7 and PL8 BHMA graded?
The PL7 and PL8 are not certified for BHMA grading....
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Push/Pull Latches | Schlage Commercial | Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series
The Ives catalog shows a 9624 offset pull that is not in the price book. What is 9624?
9624 was a typographical error.  This should read 9264.   ...
Schlage Commercial » Mechanical Locks » Push/Pull Latches