Category: Mortised

(Results from 11 to 20)
Will the Falcon MA lock fit a 1-3/8" thick door?
The Falcon MA will not fit a 1-3/8" thick door. ...
Mechanical Locks » Mortised » MA-Series | Mechanical Locks » Mortised | Falcon
How do you change the handing on the discontinued Schlage K Series Mortise Lock?
Please see the attached document for instructions. https://static-or01.inbenta.com//K%20Rehand.pdf...
Mechanical Locks » Mortised
What will happen if the voltage on an L lock goes above the 26V maximum range?
Applies to L9090EL/EU, L9091EL/EU, L9092EL/EU, L9093EL/EU, L9094EL/EU, L9095EL/EUOvervoltage will cause the lock to shut down for approximately 5 minutes to allow the circuitr...
Mechanical Locks » Mortised » L9000 Series | Mechanical Locks » Mortised » L9000 Series » Schlage | Mechanical Locks » Mortised » LV9000-Series | Mechanical Locks » Mortised » LV9000-Series » Schlage
What power supply do I use with an L9000 electrified L lock?
Applies to L9090EL/EU, L9091EL/EU, L9092EL/EU, L9093EL/EU, L9094EL/EU, L9095EL/EUThese models require 12/24 VDC with a peak current of 0.4 amps.  The following power...
Mechanical Locks » Mortised » L9000 Series | Mechanical Locks » Mortised » L9000 Series » Schlage | Mechanical Locks » Mortised » LV9000-Series | Mechanical Locks » Mortised » LV9000-Series » Schlage | System Components » Power Supplies » PS900 Series » Schlage Electronics
What was the option XL11-800 used for?
The XL11-800 is an obsolete part number used to designate the ADA thumbturn on the Schlage L9000 series mortise locks.  Current part numbers for the ADA thumbturn for the Schlage L9000 seri...
Mechanical Locks » Mortised » L9000 Series » Schlage » Schlage | Mechanical Locks » Mortised » L9000 Series
What door thickness is available on the L9000 with Olivari trim?
The L9000 locks with Olivari trim are only available for 1 3/4" thick doors....
Mechanical Locks » Mortised » L9000 Series
What finish will the mortise plug face be when used with Olivari trim?
Lock Finish Plug Face Finish 350 / RS 606 351 / DS 522 ...
Mechanical Locks » Mortised » L9000 Series
Olivari lever cut sheets.
BEJING EMILIA FIN LAMA L LASER LINK LOTUS Q MARBELLA NINA PLANET PLANET Q SECTOR SERENELLA TECNO TREND ...
Mechanical Locks » Mortised » L9000 Series | Mechanical Locks » Tubular / Interconnected » PT Series
What are the dimensions of the Olivari Link ADA turn?
The Link ADA turn is 2.1" long.  Dimensions shown are in millimeters. ...
Mechanical Locks » Mortised » L9000 Series
Olivari thumbturn dimensions.
  ...
Mechanical Locks » Mortised » L9000 Series