Is the small format IC tail piece for ND the same tail piece for CO?
The ND and CO small format IC tail pieces are different lengths. The ND tail piece is 1.83" long and the CO tail piece is 1.57" long. ...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series
Are the PL7 and PL8 BHMA graded?
The PL7 and PL8 are not certified for BHMA grading....
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Push/Pull Latches | Schlage Commercial | Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series
What is an ND81 function?
ND81 Function Description:
Outside lever is always locked when key is not present
Entrance by key only: counter-clockwise key rotation retracts latch; 180 degree clockwise key ro...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial
When did the L Series change to an new ADA Thumbturn?
Effective December 9, 2019, Schlage L Series mortise locks requiring a thumbturn will ship
standard with our new ADA thumbturn. The new ADA thumbturn is slightly smaller than the
existing ADA design w...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series | Schlage Commercial » Mechanical Locks » Mortised » LM9200 | Schlage Commercial
What was the L Series cylinder retainer part number back from 1992?
Part L283-005 was made up of a plate (L583-036) and two screws (K510-137) and is no longer offered from Schlage, see here for picture. This version was used up until 1994. When L283-005 was ...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial
What is the part number for the blank plate for D261M and B581?
The part number for a blank mounting plate for the D261M and B581 is 38-034....
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Deadbolts | Schlage Commercial » Mechanical Locks » Deadbolts » D Series | Schlage Commercial » Mechanical Locks » Deadbolts » D Series » Falcon | Schlage Commercial » Mechanical Locks » Deadbolts » B Series | Schlage Commercial » Mechanical Locks » Deadbolts » B Series » Schlage | Schlage Commercial
Can a B250 series fit a 2-1/8 door preparation?
No, there is no adapter available for the thumbturn rose to allow the B250 to fit on a 2-1/8" bore. ...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Deadbolts | Schlage Commercial » Mechanical Locks » Deadbolts » B Series | Schlage Commercial » Mechanical Locks » Deadbolts » B Series » Schlage
Can Buy American Act (BAA) compliance be seen on the order acknowledgement?
Individual products complying with BAA will have a "Y" in the product string of the individual line item. The "Y" will follow the cylinder suffix code and precede the outside design code. S...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial » Mechanical Locks » Mortised
Are the drive in latches used the "A" and "AL" series UL listed?
The Drive in latches 11-110, 11-113, 11-104, and 11-105 used on the "A" and "AL" will NOT be UL listed. ...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial » Mechanical Locks » Cylindrical » A Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued | Schlage Commercial