What is the F and Ff stamping on the latch face?
Latch products marked uppercase letter “F” comply with the positive-pressure requirements of ANSI/UL 10C. UL had previously authorized the use of the lowercase letter “f” to denote p...
Schlage Commercial » Mechanical Locks
What is lock handing?
The handing of a lock is important in order to ensure that the correct side of the door is secure, the levers are oriented properly, and that the door closes properly. There are 2 parts to a doo...
Schlage Commercial » Mechanical Locks
Does a key for a lock meet ADA standards?
Although the ADA standards address operable parts of locks – like thumbturns, keypads, turn-buttons, and of course, knobs and levers, keys are not covered by ADA. ADA requires door and gate ha...
Schlage Commercial » Key Systems » Keys | Schlage Commercial » Mechanical Locks
Pro-Lok tools no longer available.
In the 2nd quarter 2015, Pro-Lok discontinued several door prep tools/part numbers and replaced them with new tools/part numbers. The chart below indicates the discontinued part numbers (see I...
Schlage Commercial » Mechanical Locks
How to order Molex connectors.
HOW TO ORDER1. Specify CON for the Allegion Connector electronic options Example: EL-99-EO-CON, (99 Series Electrified Latching exit only with Allegion Connect) Example: L908...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Ives | Schlage Commercial » Von Duprin