Is the tailpiece retainer for the ND Yale cores available as a separate item?
The tailpiece retainer is included in kit 09-061.The kit includes:TailpieceMagnetRetainerScrew (only used on Medeco)...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series » Schlage
Can the LT locks be ordered in a split finish or split design?
The LT locks are not available with split finish or split design....
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Tubular / Interconnected | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » LT Series
Is the 09-611 indicator still available?
The 09-611 indicator will remain available as a stand-alone part for sectional trim. Pricing and ordering information is listed in the current pricebook.
...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage » Schlage | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L400 Series | Schlage Commercial » Mechanical Locks » Mortised » L400 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage
What replaced the M631?
The MA641 installed without the thumbturn is the closest replacement for the M631....
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Falcon
What wire gauge is the Allegion Connect harnesses?
The Allegion Connect wire harnesses use 20 AWG (American Wire Gauge). The molex connector and pins provided with the Allegion Connector Kit (CON-KIT) can accept wires between 20 AWG (maximum) and...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Schlage
What is visual key control (VKC) on keys?
Visual Key Control (VKC) refers to stamping the key symbol on the bow of the key. This makes identification fast and convenient. The disadvantage is that lost or stolen keys can potentially be m...
Schlage Commercial » Key Systems | Schlage Commercial » Key Systems » Keys | Schlage Commercial » Key Systems » Keys » Keys » Schlage | Schlage Commercial » Mechanical Locks
How to specify the handing of a handed lever.
Some lever designs by Schlage are handed such as Flair. Levers that are handed cannot be moved from the inside to the outside or vice versa because the direction of the lever changes. This...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Tubular / Interconnected
How to adjust the AL25 Exit lock for different door thicknesses.
To install the AL25 on a 1-3/8" door, the cotter pin needs to be moved to the hole position closest to the rose. See below. ...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial » Mechanical Locks » Cylindrical » AL Series
What is the locking time on the Schlage L9000 electrified locks?
Locking Time Cycle:Immediate locking since motor driven on the L9090EL/EU, L9091EL/EU, L9092EL/EU, L9093EL/EU, L9094EL/EU, L9095EL/EUDelayed 8-10 seconds due to pulsed signal for solenoid on the L9080...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage