Category: HandKey

(Results from 21 to 30)
Why does Tamper alert show in HandNet for Windows when connected on a test bench?
Tamper switch is active when HK-II unit is not mounted to back plate...
Schlage Commercial » Biometrics » HandKey | Schlage Commercial » Biometrics » Software » HandNet for Windows
Is the latest EN-201 Ethernet card for HP Biometric Readers up-gradable via EN200FirmwareDownloader program?
No, the EN200FirmwareDownloader will not work on EN201....
Schlage Commercial » Biometrics » HandKey | Schlage Commercial » Biometrics » HandPunch
Is the latest EN-201 Ethernet card UL Listed for both HK2 and HP Biometric Hand Readers?
Yes, UL Listed for both....
Schlage Commercial » Biometrics » HandKey | Schlage Commercial » Biometrics » HandPunch
Are the Memory upgrades for expansion of more than 32,512 Users still available for HK-2 F3 Series Hand Readers?
No, EM-813-F3 (64,768 users), EM-823-F3 (129,536), EM-833-F3 (194,304) and EM-843-F3 have been discontinued. ...
Schlage Commercial » Biometrics » HandKey | Schlage Commercial » Biometrics » HandPunch
What terminals in back of HKII reader is need to be shorted to stop the message, "Door open too long"?
Pins 10 and 11...
Schlage Commercial » Biometrics » HandKey
HK2, with heated platen, is the heater on all the time, or does it kick in at a certain temperature?
It is on all the time....
Schlage Commercial » Biometrics » HandKey
How to create facility code for a user ID when you have an HK-2 connected back to ACP
At the HK-2You have to go to Password Menu #2Select Set Facility....
Schlage Commercial » Biometrics | Schlage Commercial » Biometrics » HandKey
What additional items do I need to have to use a REX on the HK2 for one man vault?
You will need a DPS switch and a one man vault config on the HK2 biometric reader...
Schlage Commercial » Biometrics | Schlage Commercial » Biometrics » HandKey | Schlage Commercial » Biometrics » HandKey » HandKey II
Will an electronic strike work with a HK-2 CR?
A HK-2 CR only has “card reader out”, it does not have AUX 1 and 2 outputs, you will need to open the strike from the ACP, or use a HK-2....
Schlage Commercial » Biometrics | Schlage Commercial » Biometrics » HandKey | Schlage Commercial » Biometrics » HandKey » HandKey CR
Schlage Handkey II (HKII) Power Supply Information
The reader requires a 12-24VDC power source. The unit can use either a 12 or 24VDC signal from an external power supply, or a plug-in power supply: PS-110 for 110VAC facilities. PS-...
Schlage Commercial » Biometrics » HandKey | Schlage Commercial » System Components » Power Supplies

Support by product