Category: HandKey

(Results from 11 to 20)
What does STEP=0 BSN=0 mean when displayed on a Handpunch or HKII?
This indicates that the NVRAM is missing or damaged and cannot be recovered.  The reader would need to be sent in for repair with an RMA....
Schlage Commercial » Biometrics » HandKey | Schlage Commercial » Biometrics » HandPunch
How do you set up the tamper output for an HK2?
Use Aux 1 or 2 to ground for the connection.  In setup menu 2 under Auxiliary Output Control choose “Output set by Tamper.”   For alarm monitoring this will output a signal if the H...
Schlage Commercial » Biometrics » HandKey
How much does a HKII reader weigh?
A complete reader weighs 5.4 lbs....
Schlage Commercial » Biometrics | Schlage Commercial » Biometrics » HandKey
On the HandKey 2. The connection 4 and 5 pins are they NO or NC?
Neither.  Its called an open collector And the relay makes the NO and NC decision We have voltage then it drops to 0 after a hand placement then that tells the relay...
Schlage Commercial » Biometrics » HandKey
Are keys available to Unlock and Remove the HK2 from its wall mount?
Yes - part numbers are S-KY-F00 (pack of 5) for the F Series.                        ...
Schlage Commercial » Biometrics » HandKey
How do I get a dry contact closure or open with an HK-2 and a BR-100 relay?
Connect reader terminal 1 (+5V) to +5V on the relay, and connect terminal 5 on the reader to the Bell terminal on the relay. Use Normally open and Common on the relay if you want a closure by placing ...
Schlage Commercial » Biometrics » HandKey
Does the HK2-CR have an option for selecting Card or Lock Output?
No - the HK2-CR is Card Output only....
Schlage Commercial » Biometrics » HandKey | Schlage Commercial » Biometrics » HandKey » HandKey CR
How do you get passed Error 128 with biometric readers?
We still hit 1212# but then when it asks for code 67 or 77 these are your options.   Enter 67# if the reader is a HKII or HP1k-3k Enter 77# if the reader is a HP4k or XL model...
Schlage Commercial » Biometrics » HandKey | Schlage Commercial » Biometrics » HandPunch
What is the current draw of an HK-II?
At idle the HK-II will draw approximately .58 amps at 12V and .29 amps at 24V....
Schlage Commercial » Biometrics » HandKey
Can I flash the configuration on a Handkey II using Windows 10?
Yes, you can flash the configuration using DOSBox x86 Emulator with Windows 10.     ...
Schlage Commercial » Biometrics » HandKey | Schlage Commercial » Biometrics » HandKey » HandKey CR | Schlage Commercial » Biometrics » HandKey » HandKey II

Support by product