Category: HandKey

(Results from 11 to 20)
What is the default password to log into HandNet Lite?
Log in is "1234" and the password is "new"....
Biometrics » FingerKey » FingerKey DX Series » Schlage Electronics | Biometrics » HandKey » HandKey II » Schlage Electronics | Biometrics » HandKey » ID3D » Schlage Electronics | Biometrics » Software » HandNet Lite » Schlage Electronics
What should I do when my F-Series HandPunch is indicating "Memory Full"?
The F-Series HandPunch will display "Memory Full" when the number of transactions being stored on the hand reader exceed its memory capacity. When the memory capacity is exceeded, the hand reader wi...
Biometrics » HandKey » ID3D » Schlage Electronics | Biometrics » HandPunch » HP 3000 » Schlage Electronics
How do you get the camera calibration values on a biometric F-Series HandPunch?
To get the camera calibration values on a biometric F-Series HandPunch or F-Series HandKey, press the * (asterisk) key 11 times. It will display R (row), C (column), and E (exposure)&nb...
Biometrics » HandKey » HandKey II » Schlage Electronics | Biometrics » HandKey » ID3D » Schlage Electronics | Biometrics » HandPunch » HP 3000 » Schlage Electronics
What is an E-Series HandKey?
The E-Series HandKey biometric product measures the size and shape of a user's hand to verify the person's identity for accessing a secured opening. The E-Series HandKey is an all-metal unit des...
Biometrics » HandKey » ID3D » Schlage Electronics
How should I clean a biometric hand reader?
The only routine maintenance required on a biometric hand reader is cleaning.  The platen surface upon which the hand is placed, the side mirrors, and the overhead window should be cleaned with reas...
Biometrics » HandKey » HandKey II » Schlage Electronics | Biometrics » HandKey » ID3D » Schlage Electronics | Biometrics » HandPunch » G Series » Schlage Electronics | Biometrics » HandPunch » HP 3000 » Schlage Electronics
Camera calibration on a hand reader, what should the row (r), column (c), and exposure (e) calibration values be to indicate proper camera alignment?
On a biometric F-Series or E-Series hand reader, the desired row (r) value and column (c) value should each be zero (0), plus or minus 2.  The desired exposure (e) value shoul...
Biometrics » HandKey » HandKey II » Schlage Electronics | Biometrics » HandKey » ID3D » Schlage Electronics | Biometrics » HandPunch » HP 3000 » Schlage Electronics
On which operating systems is Handnet for Windows supported on?
As of August, 2017Hand Net for Windows has been tested  and passed with the following operating systems:· Windows XP Professional Service Pack 2 32 or 64 bit· Windows XP Professional Service Pa...
Biometrics » HandKey » ID3D » Schlage Electronics | Biometrics » Software » HandNet for Windows » Schlage Electronics | Biometrics » Software » HandNet Lite » Schlage Electronics
What is the "HOST BITS" setting on a Hand Reader with an Ethernet Module?
Handreaders require a static (fixed) IP address; this means you have to set its IP address, subnet mask and default gateway.These are usually assigned or issued by your local network administrator.At ...
Biometrics » HandKey » HandKey II » Schlage Electronics | Biometrics » HandKey » ID3D » Schlage Electronics | Biometrics » HandPunch » HP 3000 » Schlage Electronics
How long does the demo version of HandNet for Windows stay active?
The demo version for HandNet for Windows stays active for 30 days after installation.  No activation is needed and the demo is a full functioning application.  Once the 30 days expires, Hand...
Biometrics » HandKey » ID3D » Schlage Electronics | Biometrics » Software » HandNet for Windows » Schlage Electronics
Does the ID3D HandKey and HandPunch have a red/green verification light like the F-Series?
Yes, the ID3D does have a red/green LED light option.  It's used to indicate successful (green) or rejected (red) hand reads.  The part number is GL-100 and it can only be installed in the f...
Biometrics » HandKey » ID3D » Schlage Electronics