Category: Cylinder

(Results from 51 to 60)
Can the 20-061 mortise cylinder be ordered with other blocking ring sizes?
The 20-061 mortise cylinder can be ordered with blocking rings in 1/8", 3/16", ¼", 5/16", 3/8", 7/16" and ½" thicknesses. Specify the required blocking ring thickness when ordering. ...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Key Systems » Cylinders » Cylinder
Can the 80-102 mortise cylinder be ordered with other blocking ring sizes?
The 80-102 mortise cylinder can be ordered with blocking rings in 1/8", 3/16", ¼", 5/16", 3/8", 7/16" and ½" thicknesses. Specify the required blocking ring thickness when ordering. ...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Key Systems » Cylinders » Cylinder
Can the 80-132 mortise cylinder be ordered with other blocking ring sizes?
The 80-132 mortise cylinder can be ordered with blocking rings in 1/8", 3/16", ¼", 5/16", 3/8", 7/16" and ½" thicknesses. Specify the required blocking ring thickness when ordering. ...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Key Systems » Cylinders » Cylinder
Can the 80-302 mortise cylinder be ordered with other blocking ring sizes?
The 80-302 mortise cylinder can be ordered with blocking rings in 1/8", 3/16", ¼", 5/16", 3/8", 7/16" and ½" thicknesses. Specify the required blocking ring thickness when ordering. ...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Key Systems » Cylinders » Cylinder
What is the length of the Schlage SFIC rim cylinder bar?
The Schlage SFIC rim cylinder tailpiece length is 2.368" - 2.388"....
Schlage Commercial » Key Systems » Cylinders » Cylinder
What Sargent cylinder prep is the Schlage Sargent retrofit LFIC compatible with?
The Schlage LFIC Sargent retrofit cores should be compatible with product that accepts Sargent 6300 cores....
Schlage Commercial » Key Systems » Cylinders » Cylinder
Is the full size Everest check pin the same as the full size Everest 29 check pin?
The 34-007 check pin is used for both Everest and Everest 29 full size cylinders and cores....
Schlage Commercial » Key Systems » Cylinders » Cylinder
What are the dimensions of the Schlage FSIC mortise housing?
Schlage's FSIC mortise housing dimensions are shown below: Face (flange) diameter - 1.375"Face (flange thickness - 0.140"Barrel diameter - 1.150"Housing length (front to back (including face, not...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Key Systems » Cylinders » Cylinder
Does Schlage make a KIL cylinder for PDQ locks?
Schlage does not offer cylinders for PDQ locks.Schlage KIL cylinders may fit a PDQ lock but Schlage does not make a tailpiece to operate a PDQ lock....
Schlage Commercial » Key Systems » Cylinders » Cylinder
What plug is used in conventional Schlage mortise cylinders?
Schlage conventional rim and mortise cylinders use same plug(s) with anti-drill pins. For Classic keyways, the plug part number is 33-167For Everest and Everest 29 keyways, the plug part number i...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Key Systems » Cylinders » Cylinder

Support by product