Category: Cylinder

(Results from 31 to 40)
What is the length of a Schlage Conventional Rim Cylinder housing only?
The length is 1 1/4".  This does not include the screws or tailpiece....
Schlage Commercial » Key Systems » Cylinder Category | Schlage Commercial » Key Systems » Cylinder Mechanism | Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Key Systems » Cylinders » Cylinder
Does Falcon offer a Full Size Interchangeable Core?
Falcon does not offer a Full Size Interchangeable Core (FSIC) Cylinder, only the Small Format Interchangeable Core (SFIC).     ...
Schlage Commercial » Key Systems » Cylinder Category | Schlage Commercial » Key Systems » Cylinder Category » Falcon | Schlage Commercial » Key Systems » Cylinder Mechanism | Schlage Commercial » Key Systems » Cylinders » Cylinder | Schlage Commercial » Key Systems » Cylinders » Cylinder » Falcon
Does the Everest 29 check pin come in a pin kit?
The 40-119 pin kit includes the Everest and Everest 29 check pin part # 34-007. ...
Schlage Commercial » Key Systems » Cylinders » Cylinder
Can Sitemaster software support the new Schlage LFIC profile cylinders for Sargent?
There is no Sitemaster support currently available for the Schlage LFIC profile cylinders for Sargent or Corbin Russwin....
Schlage Commercial » Key Systems » Cylinders » Cylinder
What is the thickness of the 996L-NL/RV trim?
The escutcheon is approximately 7/8” where the rim cylinder sits in the plate....
Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Key Systems » Cylinders » Cylinder
Can I use a Falcon A2 pinning kit to pin Schlage SFIC cores?
The Schlage A2 pins have a cone shape tip whereas Falcon A2 pins are more flat/rounded on the tip and can not be used.. ...
Schlage Commercial » Key Systems » Cylinders » Cylinder
Can I use Schlage SFIC A2 pinning kit to key Falcon SFIC cores?
No, the Falcon SFIC pins are rounded/flat on the tip whereas Schlage SFIC pins are more of a cone shape on the bottom....
Schlage Commercial » Key Systems » Cylinders » Cylinder
How is the control bitting pinned in Schlage's Corbin LFIC core?
The control key will be pinned into chambers 2 and 3 for Schlage's Corbin LFIC core.The A2 combinating rule (rule of 23) will be applied only to chambers 2 and 3 of Schlage's Corbin LFIC core. For thi...
Schlage Commercial » Key Systems » Cylinders » Cylinder
How thick is the 386NL trim?
The 386NL trim for 33A and 35A exit devices is 2" thick....
Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Key Systems » Cylinders » Cylinder
What cylinder type does the 24R NL-OP use?
The 24R device with NL-OP trim uses a rim cylinder....
Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Key Systems » Cylinders » Cylinder

Support by product