Category: Cylinder

(Results from 21 to 30)
When did Everest C123 become the standard default keyway?
In 2002, the standard default keyway for Schlage cylinders went from Classic C to Everest C123.  ...
Schlage Commercial » Key Systems | Schlage Commercial » Key Systems » Cylinders | Schlage Commercial » Key Systems » Cylinders » Cylinder | Schlage Commercial » Key Systems » Keys | Schlage Commercial » Key Systems » Keys » Keys | Schlage Commercial » Key Systems » Keys » Keys » Schlage
When is Everest SL a good solution?
This document outlines the parameters and shows some example cases for when Everest SL should be used....
Schlage Commercial » Key Systems » Cylinders | Schlage Commercial » Key Systems » Cylinders » Cylinder | Schlage Commercial » Key Systems » Keys » Keys | Schlage Commercial » Key Systems » Keys » Keys » Schlage
What is the XQ11-948 part number?
XQ11-948 is a part number that is added to a Schlage Interchangeable Core mortise cylinder (either Full Size or Small Format) to invert the cam for cylinder dogging....
Schlage Commercial » Key Systems » Cylinders » Cylinder
Does the 40-247 Everest SL pin kit include all FSIC parts for rekeying?
There are 4 FSIC parts not available in the 40-247 Everest SL pin kit.90-004 Everest SL FSIC 7 pin drive pin (a.k.a. the cap pin) 90-003 Everest SL FSIC 7 pin control pin (a.k.a the tombsto...
Schlage Commercial » Key Systems » Cylinder Mechanism | Schlage Commercial » Key Systems » Cylinders » Cylinder
What are the cylinder dimensions for a Falcon MA mortise lock?
Dimensions are dependent on the type of cylinder going into the lock.  Type of trim (rose/sectional vs escutcheon) does not impact cylinder dimension in Falcon MA.  For 5 or 6 pin conve...
Schlage Commercial » Key Systems » Cylinders » Cylinder | Schlage Commercial » Key Systems » Cylinders » Cylinder » Falcon | Schlage Commercial » Mechanical Locks » Mortised » MA-Series
Does Schlage offer a plastic Full Size Construction Core?
Schlage does not offer a plastic (disposable) Full Size Construction Core.    ...
Schlage Commercial » Key Systems » Cylinders » Cylinder
Is there a difference between a full size non-IC and IC cap pin?
There was an older cap pin, part number C603-347 which is no longer available. This cap pin was approximately .475" long by .095" diameter....
Schlage Commercial » Key Systems » Cylinders » Cylinder
Why are some Primus finger pins copper colored?
...
Schlage Commercial » Key Systems » Cylinders | Schlage Commercial » Key Systems » Cylinders » Cylinder
Does the CYL 1-1/4" Schlage Everest Mortise Cylinder with two keys & 1/8" spacer ring have an interchangeable core?
It is a different part number for Interchangeable core:  FSIC with core 20-061 FSIC with core 20-061 SFIC with core 80-302 SFIC with core 80-302 ...
Schlage Commercial » Key Systems » Cylinders | Schlage Commercial » Key Systems » Cylinders » Cylinder | Schlage Commercial » System Components » Keyswitches
What cylinders can have Schlage split key construction keying?
For Schlage, split key construction keying (CK) is available for standard conventional style cylinders only.   Split key is not available for: Primus cylinders Full Size I...
Schlage Commercial » Key Systems | Schlage Commercial » Key Systems » Cylinders » Cylinder | Schlage Commercial » Key Systems » Keys

Support by product