Category: Cylinders

(Results from 81 to 90)
What is the length of a Schlage rim cylinder housing?
Here are the dimensions for Schlage rim cylinder housings.  These are measured from the back of the faceplate to the end of the cap or driver. Conventional (e.g. 20-022, 20-021) is 1 3/1...
Schlage Commercial » Key Systems » Cylinders
What is the difference between Schlage and Falcon KIL plug faces?
The Schlage key-in-lever (KIL) cylinder plug face diameter measures between .608" - .612". The Falcon key-in-lever (KIL) cylinder plug face diameter measures between .620" - .625".   ...
Schlage Commercial » Key Systems » Cylinder Category » Falcon | Schlage Commercial » Key Systems » Cylinders
What's the part number for a Schlage clover cam for a Sargent or Yale conventional mortise cylinder?
Schlage offers the following Schlage clover cams that fit on competitor conventional mortise cylinder for use in L9000 series mortise locks:   L583-197 is for Sargent and Yale conven...
Schlage Commercial » Key Systems » Cylinders
What is the purpose of the plastic washer that comes with the 24-119 cylinder?
The plastic washer that ships with the 24-119 cylinder is a spacer (part number B520-407) to facilitate using this cylinder in a Sargent lever.  ...
Schlage Commercial » Key Systems » Cylinders
Does the CYL 1-1/4" Schlage Everest Mortise Cylinder with two keys & 1/8" spacer ring have an interchangeable core?
It is a different part number for Interchangeable core:  FSIC with core 20-061 FSIC with core 20-061 SFIC with core 80-302 SFIC with core 80-302 ...
Schlage Commercial » Key Systems » Cylinders | Schlage Commercial » Key Systems » Cylinders » Cylinder | Schlage Commercial » System Components » Keyswitches
How is Schlage split key construction keying ordered?
To specify Schlage split key construction keying on a line item of cylinders or locks, use the symbol CK.  You can also specify by citing the 50-211 charge (the service charge which is applied ...
Schlage Commercial » Key Systems | Schlage Commercial » Key Systems » Cylinders | Schlage Commercial » Key Systems » Keys
Are the Schlage SFIC and FSIC mortise cam screws the same?
The mortise cam screws are not the same on SFIC and FSIC.  SFIC is B520-484 (4-40 x 1/4") FSIC is L583-200 (6-32 x 3/8") ...
Schlage Commercial » Key Systems » Cylinders
Are the Falcon and Schlage KIL cylinder plug faces the same size?
The dimensions on the Falcon and Schlage KIL (Key-in-Lever) plug faces are not the same.  Falcon KIL is .620 - .625 Schlage KIL is .608 -.612 ...
Schlage Commercial » Key Systems » Cylinders | Schlage Commercial » Key Systems » Cylinders » Cylinder » Falcon
For Von Duprin or Falcon mortise cylinder exit devices, does cylinder need to be longer on a thick door?
For Falcon and Von Duprin exit device trim requiring a mortise cylinder, the door thickness does not alter the cylinder dimension.   For example a door with 1 3/4" door thickness and a...
Schlage Commercial » Key Systems » Cylinder Category » Falcon | Schlage Commercial » Key Systems » Cylinders
What does the F cylinder suffix mean on Schlage L series mortise locks?
The F suffix on no longer available.   There used to be an "F" cylinder suffix which meant that the mortise lock would be supplied with a Schlage FSIC Core Less Logo.   If...
Schlage Commercial » Key Systems » Cylinders