Category: 33A/35A Series

(Results from 11 to 20)
Motorized Chexit Troubleshooting: When motorized Chexit device tries to arm, pushpad remains unlocked and internal alarm is pulsing fast after 2 seconds.
1.Chexit motor cable is disconnected. This cable should connect the Chexit module to the motor assembly.2. Chexit motor cable has an open connection,  or wires are in wrong order.3. Chexit motor ...
Schlage Commercial » Exit Devices » Mechanical Accessories | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin
Motorized Chexit Troubleshooting: When Chexit attempts to arm, pushpad remains unlocked and internal alarm is pulsing fast.
1. Door position switch (DPS) contact is open. Verify the DPS contacts are closed when the door is closed.2. Door position switch wiring/connection is open. With door closed, verify the DPS wiring has...
Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin
What is QM for Von Duprin?
Accepting orders for the QM option on 98/99 Rim Exit Devices, 33A/35A Rim Exit Devices, and 996L/L-BE-R/V Trims starting 4/23/2018. Accepting orders for the QM option on the 98/9927 Surface Vert...
Schlage Commercial » Exit Devices » Touch Bar | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Von Duprin | Schlage Commercial
Will the QM option make my door completely silent?
The QM option reduces the operational noise of the Exit Device or Trim during normal operation.Other factors can cause the complete door system to make noise. To be most effective, combine the QM d...
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Touch Bar | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Von Duprin
Why is my QEL device not retracting when powered.
Check the condition of the LED on the motor.The Von Duprin QEL motor has a couple features that protect the motor.If the LED is alternating between Green and Red;There is a Tamper Resistance feature t...
Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Von Duprin
Can anti-microbial coating be added to powder coated Von Duprin exit devices?
Anti-microbial coating on top of powder coat finishes such as 313, 315, and SP28 has not been successfully tested and is not offered....
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Touch Bar | Schlage Commercial » Exit Devices » Touch Bar » 22 Series | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Von Duprin
What do I get with the various Von Duprin Insulclad kits?
33/3547 INS-2 One longer ratchet release finger Two longer fingers to connect the center case to the vertical rods 33/3547 INS-4 One longer ratchet release finger Two longer fin...
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Touch Bar | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Von Duprin
How many rod guards do I need to order per exit device?
Order 2 rod guards per device if you want to cover the top and bottom rod.  The rod guard (RGO) is furnished in a 36" length.  For doors taller than 7', order additional rod guards....
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Cross Bar | Schlage Commercial » Exit Devices » Cross Bar » 55 Series | Schlage Commercial » Exit Devices » Cross Bar » 88 Series | Schlage Commercial » Exit Devices » Mechanical Accessories | Schlage Commercial » Exit Devices » Touch Bar | Schlage Commercial » Exit Devices » Touch Bar » 22 Series | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Von Duprin
How does an ALK work?
In summary, the operation of an ALK is:   The exit device RX or LX switch will trigger the alarm. To reset an  alarm that is sounding, the 3 options are: Rotate the Keyswi...
Schlage Commercial » Exit Devices » Touch Bar » 22 Series | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series
How to tell the difference between the older solenoid driven Chexit device and the newer motor driven Chexit device?
Externally;The older solenoid driven Chexit device key cylinder for arming and disarming the Chexit feature is mounted through a red, rectangular windo so that the white Status light shines through it...
Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Von Duprin

Support by product