Category: 33A/35A Series

(Results from 51 to 60)
How do exit device trim operate with Chexit devices?
How Exit Device Trim Operate with Chexit Devices   ...
Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Von Duprin
Is the sizing spacer for Von Duprin concealed cable devices available as a service item?
The cable sizing spacer is only available with Von Duprin 33/3549A and 98/9949 devices or with individual cable assemblies.  It cannot be purchased separately....
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin
How thick is the 386NL trim?
The 386NL trim for 33A and 35A exit devices is 2" thick....
Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Key Systems » Cylinders » Cylinder
Are the Von Duprin 696/697 trims compatible with 33A/35A Series exit devices?
The 696/697 trims are only compatible with 98/99 Series exit devices....
Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series
Can the current 33/3527A series device rods be used the old 33/3527?
No, the old 33/3527 rods cannot be used on the current version 33/3527A  and vice-versa. They connect to the center case and latch differently. ...
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Von Duprin
Does the QEL-B sound continuously if it receives constant power?
Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series
Does Von Duprin offer longer ratchet release screws for concealed rod exit devices?
Longer ratchet release screws are available as part of the insulclad kits....
Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series
How does QEL-L differ from standard QEL?
QEL-L only retracts an exit device's latch and allows its push pad to remain active.  This option is ideal when push pad monitoring (RX) is needed for other purposes.Standard QEL retracts an exit...
Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series
Can the QEL-B option be pre-installed at the factory?
The QEL-B option is field-install only.  It cannot be pre-installed at the factory....
Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series
Will a QEL-L work with an RX switch?
The QEL-L option comes standard with an RX switch to monitor the push pad of the exit device.With the standard QEL option, the push pad retracts every time the motor is engaged, so an RX switch would ...
Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Von Duprin