Category: 33A/35A Series

(Results from 31 to 40)
Does M996L work with delayed egress (Chexit, DE5300, RCM) ? Why does Faill Secure not work?
Yes,  M996L trim works with Von Duprin delayed egress  devices. (Chexit,  DE5300,  RCM). If your M996L is not operating in Fail Secure mode as expected,  please follow t...
Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series
What is the difference between QEL modular kit and baseplate kit?
...
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Touch Bar | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin
What is an HW device or HW mullion?
HW is Allegion-specific nomenclature used when specifying hurricane rated devices and mullions that are for use in non-impact (Wind-Only) hurricane zones.  The devices may require special strik...
Schlage Commercial » Exit Devices » Cross Bar » 55 Series » Von Duprin | Schlage Commercial » Exit Devices » Cross Bar » 88 Series | Schlage Commercial » Exit Devices » Cross Bar » 88 Series » Von Duprin | Schlage Commercial » Exit Devices » Mechanical Accessories » Mullion » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 22 Series | Schlage Commercial » Exit Devices » Touch Bar » 22 Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin
What parts are necessary to add the bottom rod/latch/strike to a 3327/3527-LBR/LBR-F (less bottom rod) device?
The following parts are required to add the bottom rod and latch to the 33/3527-LBR/LBR-F device.  Bottom Rod: 050515 for 3527 and 050514 for 3327 (specify finish)  Bottom Lat...
Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin
Explain exit device weep holes.
Weep holes are 1/4" diameter holes placed every 6 inches on the underside of a push pad style exit device mechanism case (the housing that runs horizontally across the door).  The purpose of weep...
Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin
What is the holding force for a Chexit device?
Chexit devices are tested to A156.24-2018. Per this code version, the Chexit device must withstand a  400lbf  static load for five seconds. Please reference the code for all test c...
Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin
What were the specifications for the rod adjusting screw #968741 for the old style 3347/3547 device?
It was a 10-24 x 5/8 cap screw with 5/32 hex head....
Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin
What is the difference between the Von Duprin standard baseplate return spring package 090039 and the LBR (less bottom rod) baseplate return spring package 090088?
Current baseplate spring 090039 Used with 2227/27-F, 33/3527A/27A-F, 98/9927/27-F (Standard and LBR) May be used for all standard and LBR devices produced after 1995 Was redesigne...
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Touch Bar » 22 Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin
If I need to adjust my cable length on a Von Duprin concealed vertical cable exit device, can I reuse my existing cables?
New cables need to be ordered if the cables need to be resized. Once the end fitting nut is tightened, it cinches down on the cable such that the nut can't be loosened or readjusted....
Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin
What is unique about the Von Duprin AX device?
The force required to activate operable parts is 5 pounds maximum. There is a unique UL label on it that states it meets California Building Code. The shock absorber is different from...
Schlage Commercial » Exit Devices » Touch Bar » 22 Series | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series

Support by product