What is an HW device or HW mullion?
HW is Allegion-specific nomenclature used when specifying hurricane rated devices and mullions that are for use in non-impact (Wind-Only) hurricane zones. The devices may require special strik...
Schlage Commercial » Exit Devices » Cross Bar » 55 Series » Von Duprin | Schlage Commercial » Exit Devices » Cross Bar » 88 Series | Schlage Commercial » Exit Devices » Cross Bar » 88 Series » Von Duprin | Schlage Commercial » Exit Devices » Mechanical Accessories » Mullion » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 22 Series | Schlage Commercial » Exit Devices » Touch Bar » 22 Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin
What is unique about the Von Duprin AX device?
The force required to activate operable parts is 5 pounds maximum.
There is a unique UL label on it that states it meets California Building Code.
The shock absorber is different from...
Schlage Commercial » Exit Devices » Touch Bar » 22 Series | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series
What kind of security screws does Von Duprin provide?
Von Duprin provides "pin in socket" security screws for their products...
Schlage Commercial » Exit Devices » Recessed » 94/95 Series INPACT » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 22 Series | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Von Duprin
Can I purchase a new lever for the 230L trim?
Levers for the 230L trim are not available as service/replacement items. If the lever must be replaced, then an entirely new trim is necessary....
Schlage Commercial » Exit Devices » Touch Bar » 22 Series
Will the 230L trim work with a 1-1/8" mortise cylinder
The 230L cannot function with 1-1/8" mortise cylinder.The cylinder body should be 1 ¼" long (dimension B below - from faceplate to back of cam) to properly install and operate the locking components ...
Schlage Commercial » Exit Devices » Touch Bar » 22 Series