Category: 25 Series

(Results from 11 to 18)
Did the Falcon Surface Vertical Rod Latch Covers change in 2019?
In late July 2019, the Latch Cover for Falcon 19-V, 24-V, and 25-V Series Surface Vertical Rod Devices changed to a wider footprint to match the shape of Von Duprin 98/9927 and 2227 Latch Covers. &n...
Schlage Commercial » Exit Devices » Cross Bar » XX Series | Schlage Commercial » Exit Devices » Touch Bar » 19 Series | Schlage Commercial » Exit Devices » Touch Bar » 24 Series | Schlage Commercial » Exit Devices » Touch Bar » 25 Series | Schlage Commercial » Falcon
Are Falcon exit devices available with weep holes?
Weep holes are not available with Falcon devices. ...
Schlage Commercial » Exit Devices » Touch Bar » 1490 Series | Schlage Commercial » Exit Devices » Touch Bar » 1590 Series | Schlage Commercial » Exit Devices » Touch Bar » 1690 Series | Schlage Commercial » Exit Devices » Touch Bar » 1790 Series | Schlage Commercial » Exit Devices » Touch Bar » 17 Series | Schlage Commercial » Exit Devices » Touch Bar » 18 Series | Schlage Commercial » Exit Devices » Touch Bar » 19 Series | Schlage Commercial » Exit Devices » Touch Bar » 24 Series | Schlage Commercial » Exit Devices » Touch Bar » 25 Series | Schlage Commercial » Falcon
Does the Falcon 510L have a breakaway lever?
The 510L does not have a breakaway lever.  However, the trim utilizes a shear pin which breaks if too much force is applied to the lever while it is locked.  This prevents damage to the trim...
Schlage Commercial » Exit Devices » Touch Bar » 25 Series
WHAT PARTS ARE NEEDED TO CONVERT 24/25C PANIC DEVICE TO 24/25C-WDC PANIC DEVICE?
  Note: This information is only for panic devices.  Fire rated devices may not be field converted.  The wood door fire rated product has an additional fire label on it that the m...
Schlage Commercial » Exit Devices » Touch Bar » 24 Series | Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon | Schlage Commercial » Falcon
Why is there a delay in the alarm sound for my ALK or EA alarm kit?
The touchbar monitor switch or latch bolt monitor switch should only be activated AFTER the "armed" audible alert occurs.  If the unit is being tested with a jumper wire in place on the inp...
Schlage Commercial » Exit Devices » Touch Bar » 24 Series | Schlage Commercial » Exit Devices » Touch Bar » 25 Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Falcon | Schlage Commercial » Von Duprin
Does Falcon offer a weather-proof RX (WP-RX) switch?
No, Falcon does not offer a WP-RX switch; not even as a special order item....
Schlage Commercial » Exit Devices » Touch Bar » 24 Series | Schlage Commercial » Exit Devices » Touch Bar » 25 Series
Since Falcon and Von Duprin now use the same ALK board, is the "CD-ALK" option available for Falcon 24/25 Series devices?
The “CD-ALK” option is not available for the Falcon 24/25 Series.  The devices' cover plates still differ from Von Duprin and cannot accommodate dual cylinder cutouts....
Schlage Commercial » Exit Devices » Touch Bar » 24 Series | Schlage Commercial » Exit Devices » Touch Bar » 25 Series
Is the MEL conversion kit compatible with existing Falcon AX 25 Series devices?
Falcon MEL conversion kits are compatible with 25 Series devices that have AX....
Schlage Commercial » Exit Devices » Touch Bar » 25 Series