Are Falcon exit devices available with weep holes?
Weep holes are not available with Falcon devices. ...
Schlage Commercial » Exit Devices » Touch Bar » 1490 Series | Schlage Commercial » Exit Devices » Touch Bar » 1590 Series | Schlage Commercial » Exit Devices » Touch Bar » 1690 Series | Schlage Commercial » Exit Devices » Touch Bar » 1790 Series | Schlage Commercial » Exit Devices » Touch Bar » 17 Series | Schlage Commercial » Exit Devices » Touch Bar » 18 Series | Schlage Commercial » Exit Devices » Touch Bar » 19 Series | Schlage Commercial » Exit Devices » Touch Bar » 24 Series | Schlage Commercial » Exit Devices » Touch Bar » 25 Series | Schlage Commercial » Falcon
WHAT PARTS ARE NEEDED TO CONVERT 24/25C PANIC DEVICE TO 24/25C-WDC PANIC DEVICE?
Note: This information is only for panic devices. Fire rated devices may not be field converted. The wood door fire rated product has an additional fire label on it that the metal do...
Schlage Commercial » Exit Devices » Touch Bar » 24 Series | Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon | Schlage Commercial » Falcon
Why is there a delay in the alarm sound for my ALK or EA alarm kit?
The touchbar monitor switch or latch bolt monitor switch should only be activated AFTER the "armed" audible alert occurs.
If the unit is being tested with a jumper wire in place on the inp...
Schlage Commercial » Exit Devices » Touch Bar » 24 Series | Schlage Commercial » Exit Devices » Touch Bar » 25 Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Falcon | Schlage Commercial » Von Duprin
Is it possible to convert the Falcon 712L-R/V trim to a 712L-C?
Yes, the 712L-R/V trim can be converted to a 712L-C (and vice versa) by swapping the output cams. Part numbers for the cams are as follows:712L-R/V Output Cam = 060138712L-C Output Cam 1-¾" Doo...
Schlage Commercial » Exit Devices » Touch Bar » 24 Series
Does the 4833 reinforcement plate come with the Falcon 25-C device?
The 24-C and 25-C devices are designed for use in Metal Doors and would not use the 4832, 4833, or 4834 Reinforcement Plates. Here are the part numbers for the Reinforcement Plates that are used ...
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Touch Bar » 24 Series | Schlage Commercial » Exit Devices » Touch Bar » 25 Series
Is the Pulse Width Module (PWM) or Potted Circuit Breaker (PCB) still available for the solenoid driven EL devices?
The Pulse Width Module (PWM) used in the solenoid driven Electric Latch Retraction (EL) devices previsously manufactured by Von Duprin and Falcon (including Doromatic) is still available as 050134-00 ...
Schlage Commercial » Exit Devices » Recessed » 2390 Series | Schlage Commercial » Exit Devices » Touch Bar » 1490 Series | Schlage Commercial » Exit Devices » Touch Bar » 1590 Series | Schlage Commercial » Exit Devices » Touch Bar » 1690 Series | Schlage Commercial » Exit Devices » Touch Bar » 1790 Series | Schlage Commercial » Exit Devices » Touch Bar » 24 Series | Schlage Commercial » Exit Devices » Touch Bar » 25 Series | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series