Category: Touch Bar

(Results from 51 to 60)
What is the degree of rotation needed to retract the latch on a DOM1792?
NL is at 180 degrees,   HB is 360 degrees ...
Schlage Commercial » Exit Devices » Touch Bar
Does Chexit release delay time include nuisance time?
Chexit nuisance delay can be set to  1-3 seconds,  and is intended to discourage someone from using the door without starting the release delay cycle.  And,  it prevents &nb...
Schlage Commercial » Exit Devices » Touch Bar
Can a 1-1/8" mortise cylinder be used for Von Duprin cylinder dogging (CD) if the cylinder collar is omitted?
Even with the cylinder collar omitted, the cam on a 1-1/8" cylinder would fail to connect properly with the dogging actuator.  For this reason, a 1-1/4" mortise cylinder must be used....
Schlage Commercial » Exit Devices » Touch Bar | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin
Does the 9947 KAW have a "U" shaped top latch like the one used on a DOM 1690?
Yes...
Schlage Commercial » Exit Devices » Touch Bar | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series
What touch bars are available under the Locknetics brand?
TB-36 Touch bar - 36" door 628 FINISH TB-42 Touch bar - 42" door 628 FINISH TB-48 Touch bar - 48" door 628 FINSH ...
Schlage Commercial » Exit Devices » Touch Bar | Schlage Commercial » System Components » Touch bar | Schlage Commercial » Schlage Electronics
What is the degree of key rotation to retract the 1792 latch bolt?
The key must turn approximately 180° to fully retract the 1792 latch bolt....
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Touch Bar | Schlage Commercial » Exit Devices » Touch Bar » 1790 Series | Schlage Commercial » Exit Devices » Touch Bar » 1790 Series » Falcon | Schlage Commercial » Glossary » Exits
What is the difference between QEL and Chexit?
QEL is the motorized latch retraction option for Von Duprin exit devices.  QEL is used when automatic latch retraction is needed, such as when used with access control so that the door can be p...
Schlage Commercial » Exit Devices » Touch Bar
What is the difference between Chexit, RCM and DE5300
Chexit,  Remote Chexit Module (RCM) and DE5300  are all delayed egress options for Von Duprin.The door opening size is the primary factor for selecting one of these options.  Other feat...
Schlage Commercial » Exit Devices » Touch Bar
What are all exit device abbreviations?
Von Duprin 98/99 exit device abbreviations can be found in the product catalog.  CLICK HERE for 98/99 catalog.  Most of the abbreviations found on a Von Duprin exit device box label ca...
Schlage Commercial » Exit Devices » Touch Bar | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin
What is the difference between QEL modular kit and baseplate kit?
...
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Touch Bar | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin