Will the QM option make my door completely silent?
The QM option reduces the operational noise of
the Exit Device or Trim during normal operation.Other factors can cause the complete door system to make noise.
To be most effective, combine the QM d...
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Touch Bar | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Von Duprin
Can a 9947WDC-F LBR device use the 283 strike for wood frames?
A 9847WDC-F LBR or 9947WDC-F LBR device must use the 338 strike to maintain its fire rating.
Using a 283 Strike in a wood frame would void the Fire Exit Hardware UL label of the 98/9947WDC-F LBR dev...
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Touch Bar | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Von Duprin | Schlage Commercial
2670 alarms when retracting bolt with key
Remove device cover.Remove Rim cylinder and mounting cup.Rotate cam with cross-hairs counter clockwise until it stopsRotate clock-wise about 1/4 turn until notch on plate lines up with notch on bracke...
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Touch Bar | Schlage Commercial » Exit Devices » Touch Bar » Guard X | Schlage Commercial
New Chexit alarms when arming
Turn the Chexit device off. Remove end cap and device cover plate so the Chexit PCB is visable. Check for LED's lit up red:If DPS is on, connect the orange wire to red (+24vdc)If FA is on, c...
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Touch Bar | Schlage Commercial
Can rod and latch guards be used with Windstorm rated (WS) exit devices?
This information pertains to Windstorm (WS98/9927/57/-F) devices.
Rod Guards:
Windstorm devices are physically compatible with rod guards (RGO). The device rod guides m...
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Mechanical Accessories | Schlage Commercial » Exit Devices » Touch Bar
What is the part number for the Trim Device Cable to connect an E996 or RX996 or E7500 to a Chexit module?
The Trim/Device Cable part number is 040193.
If a Chexit device is ordered with an E996/RX996/E7500 from the factory, the trim/device cable is automatically furnished at no ad...
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Touch Bar | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Von Duprin
Can fire rated exit devices have electric latch retraction?
Yes, fire rated exit devices can have electric latch retraction. However, the devices must be tied into a fire alarm system to remove power from the units so the doors will be latched in the cas...
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Touch Bar | Schlage Commercial » Falcon | Schlage Commercial » Von Duprin