Category: Exit Devices

(Results from 51 to 60)
Will an 88EO accept a rim cylinder?
Yes....
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Mechanical Accessories | Schlage Commercial
Part number for EL plunger Allen set screw?
964059-89...
Schlage Commercial » Exit Devices | Schlage Commercial
Does the 8827 have a nightlatch function?
The 8827 does not have a nightlatch function.   TP-NL or TL-NL functions are available....
Schlage Commercial » Exit Devices
Will an HL6 work with an 88 series rim device?
No. The HL6 square spindle/hub does not orient with the receiver of the 88 series....
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Cross Bar | Schlage Commercial » Exit Devices » Cross Bar » 88 Series | Schlage Commercial
What SNB is needed with 499F strike hook on wood door?
The strike hook for the 499F or 954 strike is mounted with 2 each 1/4-20 screws which could be paired with 325 SNB's.The 325 SNB's are required for use with 499F or 954 strike hook when installed on F...
Schlage Commercial » Exit Devices
Is the "LM" or "DM" option available for the 24-R?
The "LM" and "DM" options are no longer available for the 24-R panic device because it now has deadlocking standard (as of April 1, 2017).Before April 1, 2017 it was available...
Schlage Commercial » Exit Devices
How does an electric strike operate with a Chexit device?
RIM DEVICE:  The Chexit must be disarmed when an electric strike is used.  If the Chexit is not disarmed, the device latch bolt will be in a rigid state when the door tries to close.  ...
Schlage Commercial » Exit Devices
When ordering a CON-QEL device, what is the length of wire from the motor with male connector end?
The cable will be about 5-6" long.   The CON cable is the EL 6' wiring cable basically cut down to about 5-6",  with crimped pins on the ends and a loose CON plug in the bag.   ...
Schlage Commercial » Exit Devices
Can cylinder dogging (CD) be added as a kit to the motorized CXA Chexit?
No, there is no kit to add Cylinder Dogging (CD) to an existing Chexit (CX)  regardless of new or old design.  CD CX or special Center Case Dogging (SD)  for the current Chex...
Schlage Commercial » Exit Devices
How do you convert an EL to a QEL device?
If you have an EL device currently,  you would need to order a QEL conversion kit. A common question is whether the EL parts can be removed and just replaced with a motor.  That answe...
Schlage Commercial » Exit Devices

Support by product