What do the switches monitor on the E7500 and SS7500
One switch monitors the state of the solenoid. I.E. whether lever is in the locked or unlocked state. The other switch monitors the state of the deadlatch/aux latch....
Schlage Commercial » Exit Devices | Schlage Commercial
Is the Falcon 25-M exit device handed and reversible?
The Falcon 25M is handed and should be ordered with the proper door handing. The center case is not reversible. The mortise lock is field reversible. Lever trim are field rever...
Schlage Commercial » Exit Devices
Can a 996L be ordered less lever?
If the desire is to have the 996 escutcheon without a cylinder hole or the lever attached to have no operation from the pull side of the door (often used to cover existing prep for a 996L/L-BE/L-DT tr...
Schlage Commercial » Exit Devices
MD e-Moly strike finish option
The MD e-Moly option is a moly-dag finish, charcoal color similar to the latches of the panic hardware....
Schlage Commercial » Exit Devices | Schlage Commercial
Is the CON Connector attached to the QEL?
The plug is loose in the bag. The wires come with crimped pins to be inserted into the plug at the time of installation.Part Number: 040069: QEL-CON Extended Cable Assembly...
Schlage Commercial » Exit Devices
AD lock with 25M
No. The AD and CO 993 trims will only work with a 25M in the Falcon line...
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Mechanical Accessories | Schlage Commercial
What is the minimal wiring to bench test a Chexit device?
FOR TESTING PURPOSES ONLYThe following wiring can be used to verify that the device will arm and alarm.The FA Connection (a Normally Closed Fire Alarm Dry Contact between the Yellow and Red wires of t...
Schlage Commercial » Exit Devices | Schlage Commercial