Category: Accessories

(Results from 1 to 9)
If I order replacement parts from LCN such as an Arm, cylinder, Track, PA Shoe, and Cover, do I need to order screws for installing?
No, because individual or replacement parts from LCN come with the screws needed to mount them.    One exception is LCN SEM magnet parts, see here.   ...
Schlage Commercial » Automatic Operators | Schlage Commercial » Door Controls | Schlage Commercial » Door Controls » Overhead Concealed | Schlage Commercial » Door Controls » Automatic Operator | Schlage Commercial » Door Controls » Concealed | Schlage Commercial » Door Controls » Fire Life Safety | Schlage Commercial » Door Controls » High Security | Schlage Commercial » Door Controls » Accessories | Schlage Commercial » Door Controls » Surface Mounted | Schlage Commercial » LCN | Schlage Commercial
Does the Falcon OHC 100 meet ADA?
OHC 100 is adjustable from size 3-5 and is NOT ADA compliant.OHC 101 is adjustable from size 1-3 and IS ADA compliant....
Schlage Commercial » Door Controls » Concealed | Schlage Commercial » Door Controls » Concealed » OHC100 Series | Schlage Commercial » Door Controls » Concealed » OHC100 Series » Falcon | Schlage Commercial » Door Controls » Accessories | Schlage Commercial » Door Controls » Overhead Concealed » OHC 100 Series | Schlage Commercial » Door Controls » Overhead Concealed » OHC 100 Series » Falcon | Schlage Commercial » Falcon
How do I to use an overhead stop with a door closer?
Integrating an overhead stop with a door closer usually requires that both pieces of hardware be mounted near the same locations on the door and frame usually causing a conflict. In most cases, modifi...
Schlage Commercial » Door Controls | Schlage Commercial » Door Controls » Overhead Concealed | Schlage Commercial » Door Controls » Concealed | Schlage Commercial » Door Controls » Fire Life Safety | Schlage Commercial » Door Controls » High Security | Schlage Commercial » Door Controls » Accessories | Schlage Commercial » Door Controls » Surface Mounted | Schlage Commercial » Glynn-Johnson | Schlage Commercial » LCN
LCN RAL custom powder coat color chart?
See here for the LCN RAL custom powder coat color chart....
Schlage Commercial » Door Controls | Schlage Commercial » Door Controls » Overhead Concealed | Schlage Commercial » Door Controls » Automatic Operator | Schlage Commercial » Door Controls » Concealed | Schlage Commercial » Door Controls » Fire Life Safety | Schlage Commercial » Door Controls » High Security | Schlage Commercial » Door Controls » Accessories | Schlage Commercial » Door Controls » Surface Mounted | Schlage Commercial » LCN | Schlage Commercial
Locknetics DKP-NS Keypad - Removing Single User PIN
The keypad does not allow for the removal of specific user pin codes, you can only overwrite them using step 2A in the user guide (here)....
Schlage Commercial » Door Controls » Accessories
What door hardware is FEMA approved for Steelcraft Paladin Tornado doors and frames?
For a current list of approved door hardware, please refer to Tornado section of the Steelcraft Tech Data Manual, which can be found here.  Within this section you will find the following:...
Schlage Commercial » Door Controls » Accessories | Schlage Commercial » Door Controls » Surface Mounted » SC80 Series » Falcon | Schlage Commercial » Falcon | Schlage Commercial » Ives | Schlage Commercial » LCN | Schlage Commercial » Von Duprin | Schlage Commercial | Schlage Commercial » Zero
What are the measurements of the DC-HD-16 end caps (boxes)?
The dimensions in inches are: 2 1/4 x 1 5/8 x 7/8 ...
Schlage Commercial » Door Controls » Accessories | Schlage Commercial » Door Controls » Accessories » Door Hardware | Schlage Commercial » System Components » Door Cords
Where are the J1 and J2 jumpers located on the Locknetics DKP-165 keypad? What are they used for?
They are located on the bottom right of the top circuit board labeled JP1/JP2. Use these jumpers to reset the keypad....
Schlage Commercial » Door Controls » Accessories | Schlage Residential » Schlage Keypad
What version HHD do I need to have; to update firmware package AD.A.141 on my PIMs and locks?
The HHD must have a minimum version of 6.8.2...
Schlage Commercial » Door Controls » Accessories | Schlage Commercial » Electronic Locks » Networked » AD 400 Series | Schlage Commercial