How to template a 4050A with swing clear hinges?
Locate Closer body and shoe from the centerline of the swing clear hinge pin. ...
Schlage Commercial » Door Controls | Schlage Commercial » Door Controls » Surface Mounted | Schlage Commercial » Door Controls » Surface Mounted » 4000 Series » LCN | Schlage Commercial » Door Controls » Surface Mounted » 4050 Series
Can an LCN 4020 closer be used with Wide Throw Hinges?
A 4020 can be used with wide throw hinges but with standard arms, you will get a diminished degree of opening. There are other factors that can come into play, such as Reveal depth, hinge ...
Schlage Commercial » Door Controls | Schlage Commercial » Door Controls » Surface Mounted | Schlage Commercial » Door Controls » Surface Mounted » 4020 Series | Schlage Commercial » Door Controls » Surface Mounted » 4020 Series » LCN | Schlage Commercial » Door Controls » Surface Mounted » 4000 Series
What is the detection range of the 8310-813 touchless actuator?
Detection zone is 4-24". See here for complete installation instructions....
Schlage Commercial » Door Controls | Schlage Commercial » Door Controls » Automatic Operator | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series » LCN | Schlage Commercial » LCN
Are there replacement parts available for the LCN 8310-2210 activation kits?
Unfortunately we only offer complete kits, we have no replacement parts available for the LCN 8310-2210 activation kits. So if encounter any issues with either one of the wave activation plates ...
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Actuators | Schlage Commercial » Automatic Operators » Actuators » Actuators and Accessories | Schlage Commercial » Automatic Operators » Actuators » Actuators and Accessories » LCN | Schlage Commercial » Door Controls | Schlage Commercial » Door Controls » Automatic Operator | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series » LCN
Warranty information on Allegion Commercial products.
See here for our Warranty Information. ...
Schlage Commercial » Automatic Operators | Schlage Commercial » Biometrics | Schlage Commercial » Credentials | Schlage Commercial » Door Controls | Schlage Commercial » Electronic Locks | Schlage Commercial » Exit Devices | Schlage Commercial » Key Systems | Schlage Commercial » Mechanical Accessories | Schlage Commercial » Mechanical Locks | Schlage Commercial » Power Supplies | Schlage Commercial » Readers | Schlage Commercial » Security Management | Schlage Commercial » Software | Schlage Commercial » System Components | Schlage Commercial » Falcon | Schlage Commercial » Glynn-Johnson | Schlage Commercial » Ives | Schlage Commercial » LCN | Schlage Commercial » Schlage | Schlage Commercial » Schlage Electronics | Schlage Commercial » Steelcraft | Schlage Commercial » Von Duprin | Schlage Commercial | Schlage Commercial » Dexter | Schlage Commercial » Zero | Schlage Commercial » Sealing Systems | Schlage Commercial » Readers » IP Based
What is the difference between the 8310-885 and 8310-886 transmitters?
The 8310-885 is a 900MHZ transmitter that works with the 8310-880 receiver. This, 8310-885 transmitter is a Touchless retrofit transmitter for converting touch-to-touchless plate retrofit applications...
Schlage Commercial » Door Controls | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series | Schlage Commercial
Are the 4040SE and 4040SEH rollers the same?
The 4040SE and SEH roller is not the same. The 4040SE-3034SE roller has a 1/8” shoulder while the SEH-3034SE roller has a ¼” shoulder on the roller....
Schlage Commercial » Automatic Operators | Schlage Commercial » Door Controls | Schlage Commercial » Door Controls » Fire Life Safety | Schlage Commercial » Door Controls » Fire Life Safety » SEH Series | Schlage Commercial
What material are the LCN mounting screws made from?
The mounting screws supplied with LCN closers are made of steel with a Zinc coating....
Schlage Commercial » Automatic Operators | Schlage Commercial » Door Controls | Schlage Commercial » Door Controls » Surface Mounted | Schlage Commercial » Door Controls » Surface Mounted » 4010 Series | Schlage Commercial » Door Controls » Surface Mounted » 4040XP Series | Schlage Commercial » Door Controls » Surface Mounted » 4110 Series | Schlage Commercial | Schlage Commercial » Automatic Operators » Electrohydraulic » 6440XP
Are LCN Closers Fire Rated?
All LCN closers have UL listings and are in compliance to UL10C, and are Fire Rated for up to 3 hours.With regards to the 3 hour rating, all products in this category are considered 3 hour l...
Schlage Commercial » Door Controls | Schlage Commercial » Door Controls » Overhead Concealed | Schlage Commercial » Door Controls » Concealed | Schlage Commercial » Door Controls » Surface Mounted | Schlage Commercial » LCN
Does LCN offer Custom Color Matching for Powder Coat Finishes?
LCN does offer a custom color match option. This is only for Manual Closers.It would require a sample of the color to be sent to the LCN factory.We would then work to try to match the color. &nb...
Schlage Commercial » Automatic Operators | Schlage Commercial » Door Controls