Category: 4640 Series

(Results from 31 to 40)
Can a 4600 operator be used with a swing clear hinge?
Both the 4631 & 4642 can be used with a swing clear hinge. For the 4631 pull side mount you would locate the operator and track from the centerline of the swing clear hinge pin.For the 4642 p...
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electrohydraulic » 4630 Series | Schlage Commercial » Automatic Operators » Electrohydraulic » 4640 Series
Can you mount a 4642 on a 1 ½” frame face?
For a 1 ½” face frame you will need to use ST-3449. This application requires an iron angle support bracket by others....
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electrohydraulic » 4640 Series
Can you order just the back mounting plate for the 4600 operators?
Unfortunately, the back mounting plate for the 4630/4640 operators is not available by itself. The only options here will be to purchase a new operator or the 4630/40-3018 mounting plate assembly whic...
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electrohydraulic » 4630 Series | Schlage Commercial » Automatic Operators » Electrohydraulic » 4640 Series
What do I do if a 4640/4630 is making a grinding/scuffing noise?
If you have a 4600 series auto operator that is making a squealing or grinding noise when trying to open the door this typically means the “Opening Force” option on the 4630/4640 is set too high.....
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electrohydraulic » 4630 Series | Schlage Commercial » Automatic Operators » Electrohydraulic » 4640 Series
Will an operator will be damaged if the door is locked down (secure) after hours but the exterior actuator is not turned off/taking offline or the unit itself is not turned off?
Any good secure setup and installation should be getting an open signal that has already gone through credential access first (ex……card reader, keypad, Key switch) and ignoring a locked door. ...
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electrohydraulic » 4630 Series | Schlage Commercial » Automatic Operators » Electrohydraulic » 4640 Series | Schlage Commercial » Automatic Operators » Electromechanical » Benchmark | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing
What is the size of the 1AMP Slow Blow fuse in the 4600 Electric Auto Equalizer?
The fuse in the 4600 Electric Auto Equalizer is a 1A, 250V, SLOBLO fuse. It is approximately 1-1/4” long. ...
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electrohydraulic » 4630 Series | Schlage Commercial » Automatic Operators » Electrohydraulic » 4640 Series
What parts come with the 4640-480 shaft extender?
You will receive the shaft extender, the lock washer, and the -159 arm screw when you order the 4640-480 shaft extender.  ...
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electrohydraulic » 4640 Series
Can a 4640 automatic operator be used with a Removable Mullion?
The Special Template ST-3420 will be required to mount a 4640 Auto-Equalizer with a Removable Mullion....
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electrohydraulic » 4640 Series
What is the dimensions of the 4600 metal cover?
The 4600 (4630 and 4640) metal cover is  33-1/2" L x 4-3/8" W x 5-1/4" D....
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electrohydraulic » 4630 Series | Schlage Commercial » Automatic Operators » Electrohydraulic » 4640 Series
Can you mount a 4640 on a 32” door?
You can use ST-3071 to mount a 4640 on a 32” door.  This will give the unit a 120 degree of power opening and the closer must be able to hang over the frame face at the hinge edge.   No sp...
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electrohydraulic » 4640 Series

Support by product