Category: 6440XP

(Results from 1 to 10)
What degree of opening swing can the LCN 6440XP Compact Operator be set to?
The LCN 6440XP Compact Operator is designed to be calibrated and set up for 70-110 degree of powered opening....
Schlage Commercial » Automatic Operators » Electrohydraulic » 6440XP | Schlage Commercial » Automatic Operators » Electrohydraulic » 6400
What is the max door weight for the LCN 6440 Compact Operator?
The max door weight for the LCN 6440 Compact Operator is 185 lbs....
Schlage Commercial » Automatic Operators » Electrohydraulic » 6440XP
Is the LCN 6440 Compact Operator handed?
No, the LCN 6440 Compact Operator is non-handed, designed for use with the non-handed LCN 4040XP....
Schlage Commercial » Automatic Operators » Electrohydraulic » 6440XP
Can the LCN 6440 Compact Operator be used in a Blow Open application?
Unfortunately the LCN 6440 Compact Operator cannot be used in a Blow Open application....
Schlage Commercial » Automatic Operators » Electrohydraulic » 6440XP
Is the Hold Open Time adjustable on the LCN 6440 Compact Operator?
Yes, it can be adjusted from 1 – 30 second hold open times, in full second increments.  The default Hold Open Time is 1 second – enabling the Long Hold Open feature will provide a 5 second Ho...
Schlage Commercial » Automatic Operators » Electrohydraulic » 6440XP
Does the LCN 6440 Compact Operator have a Power Boost Feature?
Yes, the 6440 Compact Operator has a Power Boost.  Only setting is enabled (on) or disabled (off).  ...
Schlage Commercial » Automatic Operators » Electrohydraulic » 6440XP
What is the clearance required at 90 degrees, between the door and wall for a pull side mount using the 6440XP?
Schlage Commercial » Automatic Operators » Electrohydraulic » 6440XP
Can the LCN 6440XP compact Auto be used with Motion Sensor, such as the 8310-854?
No, this is not a recommended application....
Schlage Commercial » LCN | Schlage Commercial » Automatic Operators » Electrohydraulic » 6440XP
Does the 6440XP auto have a push n go function?
No, there is no Push n Go function with the 6440XP auto....
Schlage Commercial » Automatic Operators » Electrohydraulic » 6440XP
Does the LCN 6440 drop plates need to be thru bolted?
Door mounted 6440 drop plates should be installed with TB’s supplied with the Compact Auto. This note will be added to the instructions. ...
Schlage Commercial » Automatic Operators » Electrohydraulic » 6440XP

Support by product