Category: RC Reader Controller

(Results from 41 to 48)
When REX is enabled for Schlage RC devices, and set for “Admit”, how does the admit function?
When the REX function is enabled and set to “Admit”, upon use of the REX input trigger (Green and Black wires), the access point will release for the “Latch Interval” set for that device in Pu...
Schlage Commercial » Software » Isonas » Pure Access Cloud | Schlage Commercial » Software » Isonas » RC Reader Controller
When AUX is enabled for Schlage RC devices, and set for “Admit”, how does the admit function?
When the AUX function is enabled and set to “Admit”, upon use of the AUX input trigger (Grey and Black wires), the access point will release for the amount of time the trigger is held.  ...
Schlage Commercial » Software » Isonas » Pure Access Cloud | Schlage Commercial » Software » Isonas » RC Reader Controller
When updating firmware on a Schlage Reader Controller (RC11, RC15, RCK15), avoid doing so while the device is unlocked via an Auto Unlock rule.
The access point's latch state may change to Locked after the firmware update completes.  In the event of a standard Auto Unlock rule, the device should automatically re-unlock.However, if the ac...
Schlage Commercial » Software » Isonas » Pure Access Cloud | Schlage Commercial » Software » Isonas » RC Reader Controller
What credential formats do Schlage Reader Controllers (RC11, RC15, RCK15) support in Pure Access Cloud?
125kHz Proximity: 26A, 28G, 28H, 32K, 32X, 33D, 34N, 34S, 35C, 35X, 36B, 36C, 36L, 36M, 36X, 37B, 37H, 37P, 37X, 40X, 48X13.56MHz Smart: Schlage MIFARE Classic, Schlage MIFARE Plus, Schlage DESFire EV...
Schlage Commercial » Software » Isonas » Pure Access Cloud | Schlage Commercial » Software » Isonas » RC Reader Controller
How are pin numbers enabled for reader controllers in Open Options?
In the access point settings, * and  # need to be enabled...
Schlage Commercial » Software » Isonas » RC Reader Controller
Pure Access Cloud toggle function
   For Isonas devices, toggle is a host-based feature.  Therefore, the device the credential is presented at must have an active connection to the Pure Access Cloud server for the toggl...
Schlage Commercial » Software » Isonas » Pure Access Cloud | Schlage Commercial » Software » Isonas » RC-04 | Schlage Commercial » Software » Isonas » IPBridge | Schlage Commercial » Software » Isonas » RC Reader Controller
How do I replace a Schlage device in a Pure Access Cloud tenant?
The MAC address is greyed out in the Edit Access Point window.Unlike with Isonas devices, Schlage access points cannot be replaced via MAC replacement.  - Commission the new device to the te...
Schlage Commercial » Software » Isonas » Pure Access Cloud | Schlage Commercial » Software » Isonas » RC Reader Controller
What is the part number for the In Rush Suppressor for use with Schlage Reader Controllers?
Magnetic Lock Kit - In Rush Suppressor:    P/N: ACC-IRS-4700...
Schlage Commercial » Software » Isonas » RC Reader Controller

Support by product