Category: PT Series

(Results from 11 to 17)
Olivari lever cut sheets.
See link here for information on Olivari trim designs below.  Bejing Emilia Fin Lama L Laser Link  Lotus Q Marbella Nina Planet...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » PT Series
What is the door prep requirements for the PT series?
The PT series requires a non-standard 1" crosssbore.  See templating information here....
Schlage Commercial » Mechanical Locks » Tubular / Interconnected » PT Series
Are the PT10 and PT40 latches the same?
PT10 & PT40 require different latches.   ...
Schlage Commercial » Mechanical Locks » Tubular / Interconnected » PT Series
What is the default backset for the PT series?
There is no default, you must specify either 2 3/4" or 2 3/8"....
Schlage Commercial » Mechanical Locks » Tubular / Interconnected » PT Series
Does rotating the inside lever release the PT40 privacy button?
If the privacy pin is pushed in to lock the outside lever, rotating the inside lever will "pop" the privacy pin therefore unlocking the outside lever....
Schlage Commercial » Mechanical Locks » Tubular / Interconnected » PT Series
Where can I get information for the PT Series Olivari products?
PT Series & Mortise Olivari Door Templates: PT Series Tubular Templates Olivari Mortise Trim Templates ...
Schlage Commercial » Mechanical Locks » Tubular / Interconnected » PT Series
Is the Schlage PT Series tubular lock UL listed?
The Schlage PT Series Tubular is not listed by UL as Fire Rated. This product is intended for interior door applications....
Schlage Commercial » Mechanical Locks » Tubular / Interconnected » PT Series

Support by product