How to manually enroll or read a proximity credential into Schlage Express
Proxalator software version 2.4.0 supports these proximity bit formats to allow manual card data conversion to the Encoded ID that can be copied into Schlage Express. 26 Bit 34...
Schlage Commercial » Credentials » Multi-Technology | Schlage Commercial » Credentials » Proximity | Schlage Commercial » Credentials » Proximity » 7000 Series | Schlage Commercial » Credentials » Proximity » 7000 Series » Schlage Electronics | Schlage Commercial » Credentials » Proximity » Fobs | Schlage Commercial » Credentials » Proximity » Fobs » Schlage Electronics | Schlage Commercial » Credentials » Proximity » PRX Series | Schlage Commercial » Credentials » Proximity » PRX Series » Schlage Electronics | Schlage Commercial » Software » Schlage Express | Schlage Commercial » Software » Schlage Express » Software | Schlage Commercial » Software » Schlage Express » Software » Schlage Electronics
Will a CT5000 work with FIPS PIV credentials and Schlage Express software
No, the CT5000 does not support FIPS PIV credentials.Although the CT5000 is compatible with the aptiQ family of readers that are FIPS PIV compatible, the firmware of the CT5000 does not support ...
Schlage Commercial » Credentials | Schlage Commercial » Credentials » Multi-Technology | Schlage Commercial » Credentials » Smart Card | Schlage Commercial » Electronic Locks | Schlage Commercial
How can I find the facility code on an existing credential?
There is a long stamped number on the fob. If you can email us or call us with the long stamped number, we can look it up for you.
Email: electronic_lock_techprodsupport@allegio...
Schlage Commercial » Credentials | Schlage Commercial » Credentials » Multi-Technology | Schlage Commercial » Credentials » Proximity | Schlage Commercial » Credentials » Proximity » Fobs | Schlage Commercial » Credentials » Smart Card
LE and NDE Sample Credential Encoding Information
The sample credentials are:
Bit format: 26A, 26-bit format
Facility code: 55
The Badge ID is printed directly on the card.
...
Schlage Commercial » Credentials » Multi-Technology | Schlage Commercial » Electronic Locks » NDE Series | Schlage Commercial » Electronic Locks » LE Series
Why is my MR2 reader not working the same way as my new MTMS readers?
The MTMS outputs magstripe data in Wiegand protocol rather than in Clock/Data....you need to use a CE-401-062 config card to change the Magstripe output to Clock/Data, then Enable CT5000 Clock and D...
Schlage Commercial » Credentials » Multi-Technology | Schlage Commercial » Readers » Magnetic Stripe Readers
What config cards come with the purchase of a MT20?
CE-401-060 = Enable POS Reader FAC Code UID Data Format CE-401-061 = Enable POS Reader Octal Data FormatCE-401-069 = Enable POS Reader Badge ID OnlyCE-401-073 = Enable POS Reader Hexadecimal Data...
Schlage Commercial » Credentials » Multi-Technology | Schlage Commercial » Readers | Schlage Commercial » Readers » Multi-Technology » MTSeries
Do the MT Series readers have a unique MAC Address?
The MT Series readers do not have a MAC address since they are not connected to a network....
Schlage Commercial » Credentials » Multi-Technology | Schlage Commercial » Readers » Multi-Technology » MTSeries