Can the Zero 2361 have a different finish?
When using the 2361 in an application along with another piece such as 232/233/237 the 2361 is an anodized piece and does not match the mill finish of the other pieces exactly. When they are p...
Schlage Commercial » Zero
Zag Scoring Zero Seals
Seals ordered with Zag are scored every 6" to assist with anti ligature sensitive applications....
Schlage Commercial » Zero
What weld options are available for Zero thresholds?
The aluminum plates with a threshold rest such as #268, 68, 168, 105 & 106-can be spot welded. When multiple plates are being used with a connector like #269 or 469, these can also b...
Schlage Commercial » Zero
Are the 321 and 323 automatic door bottoms handed?
Yes, these models have extension pieces on them such that you cannot just flip the complete unit over for different door handings. Since the brass adjusting nut must always be on the hinge side ...
Schlage Commercial » Zero
Can threshold 68A, 678A, and 69A be welded?
Welding the #69 butted to the end of a #678 threshold is not available. However, if the 69 is used as as a shim under the 678, it can be done.
...
Schlage Commercial » Zero