Category: Von Duprin

(Results from 61 to 70)
What is the difference between the E option and the E996 option for 98/99 series rim devices?
We used to offer a E99 rim device where there was a solenoid to lock or unlock the lever or thumbpiece trim on the back side of the center case of the 98/99 device.  When we created the E996L trim th...
Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Von Duprin
How should a Von Duprin exit device be written out for ordering?
To order Von Duprin exit devices,  reference the "How to order" section in the Von Duprin catalogs. All Von Duprin device series Catalogs are available on website. Choose  "Catalog...
Schlage Commercial » Exit Devices » Cross Bar » 55 Series » Von Duprin | Schlage Commercial » Exit Devices » Cross Bar » 88 Series » Von Duprin | Schlage Commercial » Exit Devices » Recessed » 94/95 Series INPACT » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 22 Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Von Duprin
Can you electrify a LP373L-BE trim?
Existing Von Duprin LP373L-BE trim can't be electrified. You can order an E-LP373L-BE trim. LP373L-BE or E-LP373L-BE trim is used with Von Duprin 94/95 series Inpact devices....
Schlage Commercial » Exit Devices » Recessed » 94/95 Series INPACT » Von Duprin | Schlage Commercial » Von Duprin
E996 Trim has 24VDC but seems to chatter and fluctuate in voltage?
Standard E996L operates on 24VDC and 250 milliamps.  If AC power is applied this could cause the E996L to "chatter".  Possible Solutions:Check your voltage. Make sure the wires on the E...
Schlage Commercial » Von Duprin
What is the amp draw on EL device?
The amp draw on EL device is16 amp inrush with .3 amp holding....
Schlage Commercial » Von Duprin
Are the mounting studs on 990 trims located where the studs for the 996 trims are located?
The 4 main mounting studs are located in the same position, but the 990 trims have a 5th stud located at the bottom of the pull handle....
Schlage Commercial » Von Duprin
Can danmark lever designs be used on Von Duprin Exit Device trims?
Von Duprin does not offer any of the danmark lever designs by Schlage....
Schlage Commercial » Von Duprin
Can you change the handing in the field of a EL1490?
No. The handed baseplate must be purchased: KIT.1011 EL1490 Conversion Kit LHR 36" - KIT.1010 EL1490 Conversion Kit RHR 36" - KIT.1013 EL1490 Conversion Kit LHR 48" - KIT.1012 EL1...
Schlage Commercial » Exit Devices | Schlage Commercial » Von Duprin
Do we have trims for old style 33/35 series of devices?
We no longer carry trims for the old style 33/35 exit devices.  New trims for 33A/35A series exit devices will not work with the old 33/35 series exit devices....
Schlage Commercial » Von Duprin
What is the difference between the E option and the E996L option for 98/9975 series devices?
E option for 98/9975 is an electric mortise lock.E7500 and E996L is an electric trim....
Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Von Duprin

Support by product