Category: Von Duprin

(Results from 51 to 60)
How do you change the Von Duprin 990TP trim to NL function?
Recommend to order a new 990NL-R/V or M trim to change from TP/Classroom function to NL/Storeroom function. You will also need to reinstall the NL drive screw back into into the master ...
Schlage Commercial » Von Duprin
What replaced the Von Duprin 372L trim?
The Von Duprin 372L & 370L/BE series trims are discontinued and there are no replacement for them.  The new 33A/35A series exit devices use 360L trim. 370/BE trims were used with old style 33/35 ...
Schlage Commercial » Von Duprin
What power supply is used with RX or LX switches?
RX switch is request exit and LX switch is latch bolt monitor switch. They do not required a power supply directly. The electrified hardware that RX or LX switch connects...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Power Supplies » Standard » PS900 Series » Von Duprin | Schlage Commercial » Schlage | Schlage Commercial » Von Duprin
Where is the template for the E996L on a wood door?
The template for E996L wood template is the same as 996L wood template. W20003 for rim or vertical rod and W20006 for mortise....
Schlage Commercial » Von Duprin
What thumbturn control is correct for the 33A/35A/98/9947/48?
The 376T is the correct thumbturn control for 33A/35A/98/9947/48 exit devices for metal door and 376T-WDC for wood door. ...
Schlage Commercial » Von Duprin
Will the top latch on a 33/3547A work on a older 33/3547?
The current 33/3547/47-F latches are the same as the latches used with the old style Von Duprin 33/3547/47-F devices. ...
Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Von Duprin
Do we have a finished screw package to mount the 990 or 230 DT trim on a door independent of an exit device?
You will need the 050140-xx finished screw package to mount the trim to a wood door....
Schlage Commercial » Von Duprin
What templates do I use for the RX98L x E996L?
 Click Here to view the Hollow Metal or Wood Door Templates for Von Duprin devices   The E996L trim and RX98/99 devices  use the standard 996L and 98/99 templates...
Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Von Duprin
Does the Von Duprin E996L trim require the NL drive screw be installed into the device to function properly?
Von Duprin 98/99 NL drive screw is located in back of the 98/99 center case assembly. NL drive screw should be left in with trim lock slide plate in up position in the 98/99 exit device with E996...
Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Von Duprin
Why does my Trilogy Lock not retract the latch when I replace a lever trim on a 98/99 series device?
If the NL screw on the 99 device has been removed the Trilogy lock will not retract the latch....
Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Von Duprin

Support by product