Category: Tubular / Interconnected

(Results from 11 to 20)
What are the door prep difference's between the Falcon H Series and the Falcon H2100 Series.
Please see here for prep difference between the Falcon H and Falcon H2100 lock. ...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Tubular / Interconnected | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » H Series | Schlage Commercial » Falcon | Schlage Commercial | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » H2 Series
What is the part number for the conversion kit that converts PD to JD for the Schlage S series lever lock?
To convert an S lock from PD to JD specify the 08-030Kits include the FSIC lever, driver, and retainer.  Available in JUP, NEP and SAT lever designs....
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Tubular / Interconnected | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S-Series | Schlage Commercial
What is positive latching?
A spring loaded throw on the edge of the door that engages into a strike plate on the door frame.Schlage and Falcon locks with a latch meet this requirement. ...
Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Push/Pull Latches | Schlage Commercial » Mechanical Locks » Tubular / Interconnected
What is the FSIC tail piece used on S200 manufactured before February 2008?
The FSIC tail piece used in the S200 locks ordered before February 2008:1-3/8"- 1-5/8" door thickness = B520-2421-5/8"- 2" door thickness = B520-243 ...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Tubular / Interconnected | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S200 Series | Schlage Commercial
What are the differences between the HL6, PL7, & PL8 tubular locks?
The HL6 tubular lock is a passage function.The PL7 tubular lock is a privacy function with push-side thumbturn.The PL8 tubular lock is a privacy function with pull-side thumbturn. ...
Schlage Commercial » Mechanical Locks » Tubular / Interconnected | Schlage Commercial » Glynn-Johnson
Can a cylindrical lock be mounted on a pair of doors with a removable mullion?
Not typically. A removable mullion sits behind the doors and are used with externally mounted exit devices and strikes where the exit device latches into the external strike mounted on the mull...
Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial » Mechanical Locks » Deadbolts | Schlage Commercial » Mechanical Locks » Tubular / Interconnected
Can the CS210 be ordered with drive in latch?
The CS200 series does not offer a drive-in latch for either deadbolt or latch. ...
Schlage Commercial » Mechanical Locks » Tubular / Interconnected » CS200 Series » Schlage | Schlage Commercial » Mechanical Locks » Tubular / Interconnected
Is the door prep the same for the Schlage S200 and the Schlage FE410?
The door prep on the FE410 has a 2 1/8" bore for the Deadbolt while the S200 has a 1 ½" bore.  The door preps for the FE410 and the CS210 are the same.  Click here for the S200 door templat...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Tubular / Interconnected
What does the S or D indicate after the lock function on Schlage locks?
Prior to July 2021, many Schlage lock part numbers included an S or a D following the function number or the cylinder suffix.  Examples:AL10S, A40S, ND44S, S10S, etc. ND53PD, A70P6D, S280RD,...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Cylindrical » A Series » Schlage | Schlage Commercial » Mechanical Locks » Cylindrical » AL Series | Schlage Commercial » Mechanical Locks » Cylindrical » D Series | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » CS200 Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S200 Series
What finishes are available on the M57 and M62 lever designs for the Schlage LT series locks?
The available finishes for the M57 and M62 for the LT series are: 629 and 630 only. ...
Schlage Commercial » Mechanical Locks » Tubular / Interconnected | Schlage Commercial