Is there an ADA option for the 09-900 classroom turn?
...
Schlage Commercial » Mechanical Locks » Mortised » L400 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage
What parts are needed to install an L lock on an 1 3/8" door?
The standard L9000 lock can be ordered for thin doors (1 3/8") and the appropriate parts will be shipped. The LV9000, L400, LM9000, Anti-Ligature, and N escutcheon trims are ...
Schlage Commercial » Mechanical Locks » Mortised » L400 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage
What is the part number for the L9000 product thumbturn cylinder?
Specify the correct handing for the cylinder thumbturn to match the handing of the door it is being installed in.
NH = Non Handed (Default)
RH = Right Hand
LH = Left Hand
...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage
How does the L9071 operate?
L9071 LV9071 (ANSI F32) Classroom Security Lock
Latchbolt retracted by knob/lever from either side unless outside is locked by key from either side. Auxiliary latch deadlocks latchbolt when door ...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage | Schlage Commercial » Schlage
What parts are modified on Schlage mortise locks for thicker doors?
The L9000 lock can be ordered for doors greater than 1 3/4" thick. The allowable door thickness is dependent on the L lock function and how the lock is extended.
All loc...
Schlage Commercial » Mechanical Locks » Mortised » L400 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage
What cams do we use on the L9060?
The straight cam should be installed on the outside cylinder and the clover cam on the inside.For Schlage Conventional mortise housings use the Following cam part numbers:Straight Cam
L583-476 – Fo...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage
What is the part number for the L series handing screw?
Screw part number is L583-485.
Screw type: 8-32 UC-2A W/#6 Flat truss head Phillips recess, header point....
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage
What are the part numbers for the mounting posts and screws for an L9000 lock?
Mounting Posts
Part Number
Door Thickness
L583-211
1 3/8"
L583-212
1 3/4" - See note section on SL1 trim
L583-213
2"
...
Schlage Commercial » Mechanical Locks » Mortised » L400 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage | Schlage Commercial » Schlage
What is the part number to order an L lock with lead lining?
XL11-515 is an option for lead lining on the L9000 series mortise locks (plate not sold seperate).XL12-216 is an option for lead lining on the L400 mortise locks (plate not sold seperate).L Lock with ...
Schlage Commercial » Mechanical Locks » Mortised » L400 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage