What is the size of the L9000 spindle?
All spindles are on a "square" at 0.312" (5/16")...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage
Does Schlage have a mortise coin turn cylinder?
The 09-487 is the Schlage coin turn cylinder. It does not come standard with any function and will need to be entered as a separate line item. Specify 09-487 x length (118, 114, 138). ...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage
How do I order a lock for a non-standard or thick door?
Most locks will have a standard door range they will install on, but occasionally customers will want to use them on thicker doors. In order to do so, the extended door thicknes...
Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial » Mechanical Locks » Deadbolts » D Series » Falcon | Schlage Commercial » Mechanical Locks » Deadbolts » B Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » MA-Series » Falcon | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage | Schlage Commercial » Mechanical Locks » Portable » CL Series » Schlage
Is the 93 lever style available?
The differences in the levers are:The 93 used a conical bushing as the 93 lever diameter was smaller than the 03 lever and was manufactured from bar stockThe 03 uses a straight bushing and is castLeve...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage
What happens when a locked L/LV9000 lever is rotated past the stop?
The L/LV9000 levers will rotate as normal when locked. Once the lever is rotated to about 45 degrees the lever hits a stop. At that point if the lever is forcefully rotated past&nbs...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage
What are the wiring details for the Schlage L9000 mortise RX switch?
Specific to the RX switch installed into the L9080EL/EU and L9082EL/EU and L9000 mechanical locks prior to January 2, 2017: ALL PART NUMBERS BELOW DISCONTINUED The L-Series switched to a thr...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage
Why is the lever binding on LV9000 locks?
Doors that may be slightly under 1 3/4" thick may experience binding. To resolve simply remove the spindle springs and discard.
Alternative solution is to install the OSU ferrule kit (L583-347)....
Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage
What are the L9000 care and maintenance instructions?
L-Series lock mechanisms are designed for durability and seldom need servicing. During assembly, those points of contact that require lubrication for ease of operation are given an application o...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage