Category: Schlage

(Results from 1 to 10)
What is the size of the L9000 spindle?
All spindles are on a "square" at 0.312" (5/16")...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage
What can be ordered if a no lip strike is required for the L9000?
The L-Series standard strike is the 10-072 and the available lip lengths are listed below. 7/8"  (Flat or straight lip) See picture below.1"1 3/16" (Standard for 1 3/4" doors)...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage
Is the L-Series mortise lock UL rated?
UL Listed for 3-hour fire door (except L9076 and L9077)...
Schlage Commercial » Mechanical Locks » Mortised » L400 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage
What is the LM9000 mortise lock?
The Schlage LM9000 Multipoint Solution was a three-point locking assembly that was UL approved to FEMA 361 and FEMA 320 guidelines for outswing doors, and met ANSI ICC 500 for tornado p...
Schlage Commercial » Doors and Frames » Doors » Paladin PW Series » Steelcraft | Schlage Commercial » Doors and Frames » Frames » F & FN Series » Steelcraft | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series » Schlage
What finishes are the L locks available in?
The finishes below are available on the L9000, some lever designs and trims are not available in all finishes.  605  Bright Brass  606  Satin Brass  609 &nbs...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage
What is the diameter of the danmark rose?
The danmark roses are all 2 1/4" in diameter....
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage
Is the LM9000 certified for in-swing and out-swing applications?
The LM9000 is only certified outswing when used for tornado applications....
Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series » Schlage
Can the LM9000 multi lock series be used in standard openings?
  Specify either an L or B doors for use with the LM9000 or LMV9000 Specify the F frame for use with the LM9000 or LMV9000 Order the lock from Schlage as you would normally The concealed rods...
Schlage Commercial » Doors and Frames » Doors » B Series » Steelcraft | Schlage Commercial » Doors and Frames » Doors » L-Series » Steelcraft | Schlage Commercial » Doors and Frames » Frames » F & FN Series » Steelcraft | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series » Schlage | Schlage Commercial » Steelcraft
What would cause the SL1 lever trim to droop?
Slight lever droop is normal for the SL1 trim due to the internal safety clutching mechanism that is designed to allow clutching in both directions....
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series » Schlage
What other locks can the blue lever removal tool 24002693 be used with?
On August 15, 2012 Schlage began shipping a new, more ergonomic, lever removal tool to coincide with Phase 1 of the ND-Series improvement project.  This tool can be used for Schlage ND-Series and...
Schlage Commercial » Mechanical Locks » Cylindrical » ND Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage | Schlage Commercial » Schlage