Category: L9000 Series

(Results from 41 to 50)
Is the L9000 certified for positive pressure fire tests?
See the UL Online Certifications Directory at www.ul.com/database for additional information....
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
Can Schlage locks be re-handed in the field?
Schlage A series was discontinued in October, 2024.Schlage AL series was discontinued in March, 2021.Schlage D Knobs were discontinued in July, 2020.Schlage H Series was discontinued in December, 2017...
Schlage Commercial » Mechanical Locks » Cylindrical » B Series (Falcon) | Schlage Commercial » Mechanical Locks » Cylindrical » A Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » D Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial » Mechanical Locks » Deadbolts » B Series (Schlage) | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » CS200 Series | Schlage Commercial » Mechanical Locks » Mortised » L400 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » H Series (Schlage) - Discontinued | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S200 Series - Discontinued | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » LT Series - Discontinued | Schlage Commercial » Mechanical Locks » Mortised » LM9200
Can you order the Schlage SL1, SK1, HSLR ligature trim with the old style 09-611 Chevron style indicator?
Not available since the indicator does not meet ligature requirements....
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
Is there an ADA thumbturn option for the SL1/SK1 or L9000 HSLR ligature trim?
The standard thumbturns supplied with the SL1/SK1 and L9000 HSLR meet ADA requirements...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
Why does the L9000 Gen1 indicator cam not fit with an ADA turn?
Prior to April 2017, ADA rose thumbturns supplied with L9000 locks used the same turn as the escutcheon trim. This turn is approxiamately 1/4" longer than a non-ADA rose thumbturn. This longer turn&nb...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
What size hex key is required to install the set screw on the SL1 ligature lever?
The set screw uses a 5/64" hex key....
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
What size hex key required to install the screw on the SL1/SK1 thumbturn?
The thumbturn set screw uses a 0.05" hex key....
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
What size pilot hole should be drilled when installing the L9000 mortise 09-509 rose thumbturn?
Pilot holes can be drilled at 5/64"....
Schlage Commercial » Mechanical Locks » Mortised » L400 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
How does the Door Position Sensor operate with an L9000 lock?
Door Position Sensor (DPS) detects the position of the door, open or closed, by utilizing a sensor in the mortise lock to detect a magnet located in the door strike. Normally open, normally closed, an...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
Which EPT should be used on the L9000 electrified locks?
Depending on your situation the EPT-2 (two wire) or EPT-10 (10 wire) will be used.  A simple L9000 electrified lock with ONLY power wires can be used with the EPT-2.  Any L9000 electrified l...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series