Category: L9000 Series

(Results from 31 to 40)
Has the L283-031 mounting plate changed?
The L283-031 was modified to have cut outs on both sides for use in both the L9000 and LT locks.  Please see here for an image of the modified mounting plate. ...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » LT Series - Discontinued
What is the locking time on the Schlage L9000 electrified locks?
Locking Time Cycle:Immediate locking since motor driven on the L9090EL/EU, L9091EL/EU, L9092EL/EU, L9093EL/EU, L9094EL/EU, L9095EL/EUDelayed 8-10 seconds due to pulsed signal for solenoid on the L9080...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
Is there a mounting template for the L-series Gen1 indicators?
...
Schlage Commercial » Mechanical Locks » Mortised » L400 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
Can a door position switch be ordered with an L series lock?
As of January 02,  2017, Schlage non-deadbolt mortise locksets can be ordered with a door position switch.  To order the door position switch with an L series lockset specify DPS in the opti...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
L9000 Gen1 indicator may bind and stop operating
Improper door prep and installation is the leading cause for L9000 indicators to not work properly.  Door prep and installation should be checked first before replacing any parts.   Pl...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
When did the Schlage motor driven mortise locks launch on the L9090 L9091 L9092 L9093 L9094 L9095?
The new L909x was available to order 10/15/2014, with shipments starting 10/28/2014....
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
Why does my outside lever retract the deadbolt on the electrified L9000?
The electrified L9400 locks can be used for applications such as a hospital "sleep room", bathroom or similar application where the electrified L9400 lock utilizes access control such as a card reader...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
What is a the part number for the DPS Magnet and tray on the L909X Mortise locks with Door Position Sensor?
L583-761 DPS Magnet Tray (Used on L909X (non deadbolt models only).L583-760 DPS Magnet (Used on L909X (non deadbolt models only). ...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
Can the Gen2 indicator be ordered with an electrified L9000 mortise lock?
Non-Deadbolt functions: (L/LV9090, L/LV9091, L/LV9092, L/LV9093, L/LV9094, L/LV9095) not allowed due to these locks not having a turn hub. Deadbolt functions: (L/LV9492, L/LV9493, L/LV9494, L/LV...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
Why does the L9000 lock with rx switch bind when I change the handing?
Schlage non-electrified L9000 mortise locks began using a modular type RX switch for locks specified with the RX on January 02, 2017. The RX is handed in that it must always be on the inside. If a loc...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series

Support by product