Are indicator kits available to add to an L9000 mortise lock?
Retrofit Indicator kits are available to add Indicator Trim to 36 compatible L9000 Series functions.A complete list of functions available with Indicator Kits, part numbers and pricing can be found he...
Schlage Commercial » Mechanical Locks » Mortised » L400 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
Can the driver be replaced on the Gen1 indicator for the Schlage L9000 locks?
L583-709 Message sign, LOCKED/UNLOCKED, for 180 degree indicator - NO LONGER AVAILABLEL583-710 Message sign, OCCUPIED/VACANT, for 180 degree indicator - NO LONGER AVAILABLEL583-711 &...
Schlage Commercial » Mechanical Locks » Mortised » L400 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
What are the cylinder length requirements for the L9000 Gen1 (Discontinued) indicators?
For the Gen1 indicators, the cylinder length required (for standard 1-3/4” door) is 1-1/4” regardless whether the trim is sectional or escutcheon.For the older 09-611 (Chevron) sectional (rose) in...
Schlage Commercial » Mechanical Locks » Mortised » L400 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
Why is the mortise Gen1 indicator showing locked when the door is unlocked?
...
Schlage Commercial » Mechanical Locks » Mortised » L400 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
Is the St. Annes lever still available?
In an effort to reduce confusion associated with similar-looking lever designs, please be advised that the St. Annes lever for the Schlage L-series mortise lock, LT-series tubular lock, and Von Duprin...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » LT Series - Discontinued
What application does the L9094 serve?
The L9094 was designed for retrofitting into an existing door prep that
also has an inside cylinder. ...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
What is the XL12-728?
The XL12-728 was a special for an inside sectional indicator option for the L9071 and the L9457. This option has been discontinued and is no longer available....
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
Will a Schlage L9000 fit a Falcon MA door prep?
The Schlage L9000 lock will not fit in a door prepped for the Falcon MA.The mounting post holes are located 90 degrees off from each other on the Falcon MA and the Schlage L9000.On the MA series,...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
When unlocked why does the outside lever not retract the latch on the L9090, L9091, L9092, L9093, L9094, L9095 installed with RX,
When the RX switch on a L9090, L9091, L9092, L9093, L9094, L9095 is handed incorrectly it can cause the outside lever to rotate in the upward motion, but stayed in the locked position when trying to r...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series