Category: L9000 Series

(Results from 11 to 20)
What electrified mortise locks are available by Schlage?
Schlage has the L9090EL/EU, L9091EL/EU, L9092EL/EU, L9093EL/EU, L9095EL/EU, L9492EL/EU, L9493EL/EU, L9494EL/EU and L9495EL/EU functions available. Refer to the current Commercial Price Book for p...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
What replaced the L9080EL/EU?
The following lock conversions are shown below:L9080EL/EU --> L9092EL/EU L9080EL/EU L283-263 --> L9092EL/EU RX L9082EL/EU --> L9095EL/EU L9082EL/EU L283-239 --> L9095EL/EU RX L...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
Is a latchbolt monitor available with the Schlage electrified mortise locks?
As of February 2016, all Schlage electrified locksets can be ordered with latchbolt monitoring.  To order latchbolt monitoring with electrified mortise locksets specify LX in the option field. &n...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
Can the RX switch be rehanded on the Schlage electrified mortise locks?
On Vandlgard versions of the electrified L9000 (LV909X, LV949X), the RX switch is built into the lock case. Therefore, the RX switch CANNOT be re-handed on electrified Vandlgard locks....
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
What changed between the L9080 and L9090 electrified locks?
 ...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
What wire gauge is required for the L9090EL/EU, L9091EL/EU, L9092EL/EU, L9093EL/EU, L9094EL/EU, L9095EL/EU Schlage electrified locks?
Please see here for the wire run and wire gauge requirements for the L9090EL/EU, L9091EL/EU, L9092EL/EU, L9093EL/EU, L9094EL/EU, L9095EL/EU Schlage Mortise locks. ...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
Can AC or rectified AC voltage be used to operate the L9090, L9091, L9092, L9093, L9094 or L9095 EL/EU mortise lock?
AC voltage should never be used even when using a rectifier. ...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
The Schlage electrified mortise lock motor makes noise when powered but will not lock or unlock after changing the lock handing.
When the RX switch on a L9090, L9091, L9092, L9093, L9094, L9095 is handed incorrectly it can cause the outside lever to rotate in the upward motion, but stayed in the locked position when trying to r...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
Why are the mounting posts on the SL1 too short?
The SL1 trim uses longer mounting posts than a standard trim.For SL1 trim on a 1-3/4” door, the mounting post are L583-214.For SK1 trim on a 1-3/4” door, the mounting post are L583-212.  No C...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
Is the 09-611 Chevron style indicator still available?
The 09-611 Chevron style indicator will remain available as a stand-alone part for sectional trim.  Pricing and ordering information is listed in the current pricebook....
Schlage Commercial » Mechanical Locks » Mortised » L400 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series

Support by product